Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

2-D Gouge Review

Posts

2-D Gouge Review

#1

2-D Gouge Review

Steve in NC

>Based on the advice from this forum a couple of weeks ago, I teamed up Doug T's 5/8 V gouge and Dave P's 20" handle (Hence the 2-D name, (easier to say than Thompeebles)).

What a treat! It cuts and handles so smoothly. The pride in craftsmanship from both is very evident. I had Dave drill out the handle on both ends so I can use both the 5/8 I have and the 1/2 I will buy next.

It is so nice to be able to purchase tools from two such fine folk. I have never met then in person but I feel like I know trust them.

Thanks Doug and Dave and Thanks to Woodcentral for providing this great forum.

Steve

Re: 2-D Gouge Review

#2

Re: 2-D Gouge Review

Sean Troy

>Yep, two of the nicest guys you'll meet. After I get a few more bills paid, I'm putting in an order.

Re: 2-D Gouge Review

#3

Jesper, Denmark

Re: 2-D Gouge Review

Jesper, Denmark

>You should spend a little extra and try the U-style for the inside of bowls - better cut than anything � have ever tried.

Re: 2-D Gouge Review

#4

Thanks Steve

Dave Peebles Lyons, Ohio!

>Hey Steve,

Thanks for the feedback. I also find it to be a good combo. :)

I only have about five or six of Doug's tools now. I guess that's why I started making handles.

Good to hear I held up my end. :)

Thanks,

Dave

Re: 2-D Gouge Review

#5

Re: 2-D Gouge Review

Doug Thompson near Cleveland

>Steve, this is good to read... a 20 inch handle on a 5/8 AND a 1/2 bowl gouge is IMO perfect, (a 16 inch on a 3/8)

What's in a name... that which we call a 2D, Thompeebles or ??? works well together.

Re: 2-D Gouge Review

#6

Re: I'm doing a demo for a club....

Jamie Donaldson

>....in Omaha this weekend, and will be the first trip where I can pack all my new 2D tools/handles in a standard suitcase because they break down into sections so easily. In years past the long handled tools were a constant problem/worry, often requiring special container and hand inspections, so travel will be much more compact in the future. Now if I could shrink that medium sized meat cleaver I use to knock off bark- it looks so bad on an X-ray screen!

Re: 2-D Gouge Review

#7

Re: I'm doing a demo for a club....

Doug Thompson near Cleveland

>Carry steel in your suitcase will set off all the alarms in the airport. I found out by mistake they won't allow steel in a carry-on luggage... the goverment now owns a 1-1/4 scraper... that was sad to see.

Re: 2-D Gouge Review

#8

Re:All tools in checked bag Doug, but ...

Jamie Donaldson

>...I have had checked bags X-rayed in the past. The meat cleaver was bad, but they thought my Wolverine gouge jig was some kind of break-down pistol mechanism without the barrel? Imagine me trying to explain what is was to the average government trained(?)screener!