Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

After factory speed control for a Nova 1624

Posts

After factory speed control for a Nova 1624

#1

After factory speed control for a Nova 1624

Mark Trulock

>Hi

I was wondering if any Nova 3000 or 1624 users had upgraded to an electric speed control? I could not find any old posts on the subject. I love my 1624 but changing speeds is a bit of a pain.

I am interested in a plug and play sort of a unit. One that I could use without hiring an electrician, or worse bothering my brother in law. I already owe him too many favors.

Thanks

Mark

Re: After factory speed control for a Nova 1624

#2

Re: After factory speed control for a Nova 1624 *LINK*

Stuart Johnson

>I added VS to my Nova 3K with no problem. I bought a package deal from Dealers Electric and it didn't take too much to get it wired up. You will need 220V instead of 110V. I also moved up to 2HP at the same time but don't really need that extra power at least not right now.


Dealers Electric

Re: After factory speed control for a Nova 1624

#3

Re: After factory speed control for a Nova 1624 *LINK*

John Peck

>There is an article about installing a variable frequency AC motor and controller on a Nova 3000 at this website - http://www.theturnersshop.com.

Click on "Turning" on left column. Then go to "Tools" and then to "Nova 3000 Lathe".


http://www.theturnersshop.com/