Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Husqvarna E345 Chainsaw Question

Posts

Husqvarna E345 Chainsaw Question

#1

Husqvarna E345 Chainsaw Question

Clem Wixted

>I saw a local ad for a Husqvarna E345 Chainsaw with an 18" bar. The guy that bought it had an auto accident and lost most of the use of his right arm. He is selling the saw with a hard case, 4 extra chains and what he says is a "Cable" chain sharpener. He said he has cut for about an hour total with it.

I did some research on the internet and found that is is not a current model.

What is your opinion of this saw for $300 and accessories. Do you own one? I will be using it mostly for cutting turning blanks and keeping my 10 acres under control when needed. Some trees that will come down soon range from 12 inches at the base to 24 inches, mostly oak and hickory.

Thanks,

Clem

Re: Husqvarna E345 Chainsaw Question

#2

Re: Husqvarna E345 Chainsaw Question

Ken

>You can get a bran new 18" at lowes for about 350.00 or a 20" for about 400.00 with full warranty.

Re: Husqvarna E345 Chainsaw Question

#3

Re: Husqvarna 345 -E *LINK*

Mark Mandell - Gone Round In Jersey

>Hi Clem,

It is a current model listed on the Husky website (see link), but at $300 that ain't no bargain as it's about retail price. I seem to remember that the "e" series are basically consumer saws sold through home centers, but don't quote me. At 2.7hp, 12.5k, w/16" bar etc. it's a $350 NIB saw if you can find one.

Offer $200 and take it for no more than $250. Use premium gas. Like my Husky.

mm


Husky 345

Re: Husqvarna E345 Chainsaw Question

#4

Re: Husqvarna E345 Chainsaw Question

Curly Smith

>That saw cost about $300 when new. The 4 extra chains would run about $60 and the hardcase another $30. I don't know what a "cable chain sharpener" is but I assume it's one of those $20-$30 things that you can buy at Harbor Freight, NorthernTool, etc.

If you need/want the accessories then it's a good price for the package. If you don't need the accessories, and I can't imagine why you'd need more than 1 extra chain for what you'll be doing, then it's a bit pricey. FYI - you can buy a new Husky 350 for $330.

Re: Husqvarna E345 Chainsaw Question

#5

Ken, I checked at Lowe's today...

Clem Wixted

>...and they had a 16" E345 for $279.

Thanks,

Clem

Re: Husqvarna E345 Chainsaw Question

#6

Thanks, Mark

Clem Wixted

>I saw a 16" E345 today at Lowe's for $289. I thought the E might be for an electronic ignition but your explanation seems correct.

I'm not usually impressed with big box equipment, even if it is a Husqvarna. I could be wrong on this saw but I am skeptical.

I'll take a look at it tomorrow and may come back with more questions.

Do you have a 345? Why premium gas?

Clem

Re: Husqvarna E345 Chainsaw Question

#7

Curly, your advice ...

Clem Wixted

>....makes sense. I have an HF type sharpener made in Italy, so that accessory doesn't mean anything to me.

I'll take a look at it tomorrow and maybe make a much lower offer. Thanks for your input.

Clem

Re: Husqvarna E345 Chainsaw Question

#8

Re: Premium

Mark Mandell - Gone Round In Jersey

>See Keith's response to Barbara's query below. My arborist friend told me the same thing about preignition in a hot engine. His tree service runs all their saws, Husky and Stihl, on Premium. Just adjust the high speed port a bit and the saws run smoother. He also runs his mix at 40:1 (rather than 50:1), but I haven't adopted that "tip" in my 14k 372 Husky. I do however, follow his habit of idling the saw for 60 sec to cool down the piston and block before turning it off.

Re: Husqvarna E345 Chainsaw Question

#9

Thanks, Mark

Clem Wixted

>