Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Roofing Hatchet

Posts

Roofing Hatchet

#1

Roofing Hatchet

Jerry Hall

>I have entirely too much time on my hands. Was putting away my father-in-law's old roofing hatchet with one hand, and had a crummy dry black oak block in the other and said to myself, as I looked back and forth, "What the heck. It's worth a try!"

This is the result, a few minutes later: A completely turned "hatchet top," roughed to round, turned and parted with the hatchet. No sanding, or finish, obviously. I like the "Organic" look. It spins, albeit a bit top heavy. I will improve the design next time. Also use a more tolerant wood. Once I got the hang of it went fast. Kind of like a mis-handled Lacer skew. I hollow ground it and honed the bevel and corners. Not bad to use. I guess tools all work pretty much the same. ABC. Anchor, bevel, cut. Maybe next time I will use the head too as a texturing tool.


img

Re: Roofing Hatchet

#2

Re:I have a photo of David Ellsworth....

Jamie Donaldson

>... and a gang of others turning a big candlestick with an axe for Rude Osolnik's tribute at Arrowmont years ago. Anything with a sharp edge can be used to cut wood in some manner!

Re: Roofing Hatchet

#3

Re:I have a photo of David Ellsworth....

John K Jordan

>John Lucas uses an axe in his skew chisel demo.

Re: Roofing Hatchet

#4

Dick Hines

Re:I have a photo of David Ellsworth....

Dick Hines

>There will be a turner,Dug Campbell, at thr Symposium in Richmond that does a demo where he uses a bench plane to turn a spindle.

Re: Roofing Hatchet

#5

Demo this at the next meeting?....

Ed Larson

>Looks like you missed you calling. Be prepared to demo this at one of the club meeting or maybe the county fair?? Is this your entry in the top spinning contest?? Glad to see you are keeping yourself entertained.