Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Bubinga laminated bowl

Posts

Bubinga laminated bowl

#1

Bubinga laminated bowl

Bill Stehman

>Bubinga/satinwood/maple stacked laminated bowl. 7 1/2"w x 6 1/4" tall.

Very similar to what my father was making in the late 70's and many other

turners are these days. He would always turn a large flared foot which was the style at the time. I've tried several with four sided laminations which he was excellent at but I have not been successful with perfect alignment during assembly. This is my 50th laminated bowl so I wanted to share it. Thanks for looking.

Bill


img

Re: Bubinga laminated bowl

#2

Re: Bubinga laminated bowl

GolfSteve in Calgary

>I like it, Bill. Do you have a picture of the laminated blank? I think I have a good idea of how to make something like this, but there are a few steps I'm not sure about.

Looks like you oriented the centre board with the grain running vertically, and the other boards with the grain running horizontally?

For the foot it looks like you laminated a board horizontally, gluing to the end grain of the centre board?

But I cannot figure out how you got the upper two horizontal black lines. Are they painted on? If they aren't, then what a huge alignment challenge it would be to cut your lamination, then glue a black layer in between the pieces.

Very nice.

Cheers,

Steven

Re: Bubinga laminated bowl

#3

Re: Bubinga laminated bowl

Bill Stehman

>Steven, this is a simple three ring stacked laminated bowl made from 6/4 stock with black veneer between layers to mute any misalignment. All grains are horizontal but the shape creates illusions.

Thanks.

Re: Bubinga laminated bowl

#4

That's a beauty, Bill...

GaryG in MD

>I really like it. Very nice. Good work. Cheers, Gary