Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

New Shop Started

Posts

New Shop Started

#1

New Shop Started

Stuart Johnson

>I have finally started to see some progress on having a shop built. It has been like pulling teeth to even get responses from contractors let alone bids. This shows the start of the slab. What it shows is twelve loads out of a total of nineteen. There is about a four foot drop from the front to the back. The bottom photo shows what it looked like to start. In time this will be a 30x40 metal prefab. Then the works starts as my current shop (large 2 car garage) will be remodeled into a sewing "studio" for Fran.


img

Re: New Shop Started

#2

Re: New Shop Started

robo hippy

>Stewart,

I do hope that the contractor is using some thing other than the Bobcat to compact the dirt fill. Fill put in that way will only reach maybe 70% compaction, and you need 95%. If they aren't, I would expect considerable settling after the shop is built, causing more cracking than you want in any slab, or building.

robo hippy

Re: New Shop Started

#3

Re: I agree

Steve in NC

>Being a dirt engineer, my first thought when I saw the picture was the apparent lack of compaction. Fill this high really needs a techncial look to avoid problems later.

Steve

Re: New Shop Started

#4

Re: I agree

Stuart Johnson

>I don't / didn't have any idea of what is right or wrong but was able to find out this is typical in this area. That does not make it correct. Like so much if not all of this project I have to rely on the building contractor. They do a fair number of buildings like this but the majority of their work is large water towers and storage tanks. I guess time will tell.

A few issues I've had was after contacting five building contractors three returned calls and one actually followed up. Cement contractors ran a bit better. Three returned calls and two made bids. I don't know where the t.v. news keeps coming up with the slow down because it certainly isn't showing in the building industry around here.

Re: New Shop Started

#5

Re: New Shop Started

sean troy

>Good for you !!!! What a great feeling to get a new shop started. Best of luck with the whole process.