Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

4x4 maple turning squares

Posts

4x4 maple turning squares

#1

4x4 maple turning squares

Mike Rubes, Apex, NC

>Hi all,

Does anyone know where I can get some 4x4 maple turning squares? I need two about 12 inches long each. I really don't want to laminate wood together for this. I could cut them from logs I have, but I really need to get this project done quickly.

They don't even have to be maple, ash would work also. Any hard but lightish colored wood. Maybe not poplar, I think the green wouldn't work here.

Thanks in advance,

Mike

Mother's day project in the works in Apex, NC....

Re: 4x4 maple turning squares

#2

forgot to add...

Mike Rubes, Apex, NC

>yes, um so what I left out is that I need wood that is already dry, hence why I cannot cut them from logs that I have.

Sorry for the confusion.

Thanks,

Mike

Re: 4x4 maple turning squares

#3

JL

Re: Do they really have to be 4 x 4?

JL

>Or could they be about 3 1/4 x 3 1/4"? My supplier typically carries maple and ash. They are 30+" long. I've got a few on hand.

Re: 4x4 maple turning squares

#4

Re: Maybe NC Hardwoods

Steve in NC

>Mike

Have you tried NC Hardwoods in Gibsonville NC. (Out towards Burlington.) THey have a good selection of hardwoods and and often have turning stock in their "shorts" section. (And they are great folk to deal with.)

Steve

Re: 4x4 maple turning squares

#5

Re: Maybe NC Hardwoods

Mike Rubes, Apex, NC

>Hi Steve,

Thanks for the thought. I've been to that store many, many times :) You are right in that they often have good sized cutoffs. I will give them a call and see what they have in stock. It's about a 60 minute drive from Apex.

Thanks again,

Mike

Re: 4x4 maple turning squares

#6

Re: Do they really have to be 4 x 4?

Mike Rubes, Apex, NC

>Hi JL,

Thanks for your note.

They certainly don't have to be 4x4, but I am planning a pair of vases and I think 4 inch would be better. I could just as easily do them as a bud vase as opposed to flower or even make the base from a separate piece of wood.

Just curious, who is your supplier and does he have a website?

Thanks again,

Mike

Re: 4x4 maple turning squares

#7

Re: Do they really have to be 4 x 4?

Dale Bright

>Try here: http://www.dunlapwoodcrafts.com/LUMBER.htm

Re: 4x4 maple turning squares

#8

JL

Re: Do they really have to be 4 x 4?

JL

>My supplier is North GA Hardwoods (http://www.hardwoodweb.com/lumber/nghc.cfm). Their website lists all of their lumberyards. A hard maple turning square (roughly 3 x 3 x 32" ) runs about $12 each. They run about 3 1/4 x 3 1/4. They also have ash, but I usually buy their maple.

Re: 4x4 maple turning squares

#9

Re: Do they really have to be 4 x 4?

Mike Rubes, Apex, NC

>Thanks, Dale. I called and ordered some wood from them. They had listed just what I needed.

Thanks again,

Mike