Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

What an idiot!!

Posts

What an idiot!!

#1

What an idiot!!

Gary M

>... leaving a wad of fine steel wool on the workbench next to my tool grinder. Those pretty sparks nestled in the fibers, and about 10 minutes later I noticed by benchtop smoking. Can't bear to think what would have happened if I had left the shop earlier. Whew.

Re: What an idiot!!

#2

Re: What an idiot!!

john lucas

>Gary you were indeed lucky. When it happened to me the steel wool burst into pretty intense flames immediately. I brushed it off the workbench and onto the floor. Dumb move, the floor was covered with shavings (kindling). Fortunately I was able to stop it out rather quikly and nothing serious happened other than raising my blood pressure a half a mile.

Since then I've played around with it a little (I'm a fire bug I guess). some steel wool will ignite very easily and some won't. I've never really looked into what makes the difference. It's just really wise to assume that steel wool can catch fire with sparks and cause serious damage.

Re: What an idiot!!

#3

Steven Antonucci

Another thing to watch out for:

steve antonucci

>I use my belt sander upside down in a vise to grind steel once in a while... ok, more than I used it like a belt sander. If you don't clean out the metal inside the housing, you can have the same issue. I use a screwdriver blade with a rare earth magnet attached to it to pull them out.

I tried using a compressor to blow them out, but that's a really bad idea. Ever hear of fanning the flames? Same thing.

Thanks for the reminder to keep safe. Hot metal and wood don't mix in the shop.

Steven

Re: What an idiot!!

#4

Re: What an idiot!!

michael serpa

>i believe the difference is the cheap stuff has oil in it from the processing and the better (Liberon ?) kind doesn't.

Re: What an idiot!!

#5

Ellis Walentine

Another steel wool caveat

Ellis Walentine

>Steel wool and battery chargers are not a good mix. Luckily, I don't have to say DAMHIKT, but I've heard some pretty animated stories from others.

Ellis

Re: What an idiot!!

#6

Re: Another steel wool caveat

John K Jordan

>We mentioned this once before, but if you add a little powdered metal such as aluminum or silver and light the steel wool, you will get an incredibly exothermic thermite reaction hot enough to make a ball of molten steel and even weld with. Don't try this in the wood shop with a wooden floor.

JKJ

Re: What an idiot!!

#7

Re: Another steel wool caveat

gtwilkins

>I always carry some steel wool in a screw top container in my survival kit for exactly this reason, gets a fire going in a hurry. Add powdered aluminum and even the rain can't put it out! I always keep the powdered aluminum in a separate container.

Re: What an idiot!!

#8

Peter Charles Fagg (UK)

Guilty as charged!

Peter Charles Fagg (UK)

>