Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Help on turning

Posts

Help on turning

#1

Help on turning

Wayne Carson

>Is there a DVD or book for the novice turner. I have been doing light turning for a couple of years all spindle work but have no idea of how things are supposed to be done. Unless it is really a learn as you go kind of thing. Books just don't do what seeing it live does. Come to think of it I am not sure I am using the right tools for a particular job but they seem to work (I guess).

Wayne

Re: Help on turning

#2

Re: Help on turning *LINK*

Ed Davidson (Colorado Springs)

>Wayne,

Consider joining a local chapter of the AAW...there is no better way to learn woodturning than through the free demos, lectures and mentoring provided by these clubs. There's a link to a searchable database of all 287 AAW chapters below.


AAW Local Chapters

Re: Help on turning

#4

Bill Grumbine's bowl turning DVD

john lucas

>

Re: Help on turning

#5

I Agree!

Barbara Gill, Remlik VA

>

Re: Help on turning

#6

Re: Help on turning

John K Jordan

>>...or book

Even if you get a bunch of videos, pick up Richard Raffan's "Turning Wood" or Mike Darlow's "Fundamentals of Woodturning" (or better, both). These books have far more detailed information that you can get from a video due to the limited time available.

I think also that the books better teach the "why" of tools and turning. Once you know the "why", not only is the "how" easier but you have the foundation to branch out and do things never shown in the videos.

JKJ

Re: Help on turning

#7

Steven Antonucci

Go to a club meeting

steve antonucci

>Bring a list of questions. Find someone that will spend a few minutes with you. A DVD is nice to show you what's the right way to do something, but it will never tell you that you're doing it "wrong".

Steven

Re: Help on turning

#8

Re: Go to a club meeting

Bill Howatt

>Well worth the effort to pursue this mechanism. Not only will somebody answer your questions but they may have classes and other resource material with recommendations. Plus you will meet friendly people with the same interest.

I had been turning for a few years before I went to my first meeting. I thought I was reasonably aware of things in the turning world but was amazed at how much I continue to learn at the meetings.

Bill

Re: Help on turning

#9

Re: Help on turning

R Acuna

>Hey, look on youtube for demos, It isnt all that close up but you at least get to see the body language and how to approach the wood or bring the tool into play. Its free and it might help out, just type in woodturning, there are tons of free demos. Everything from pens to giant hollow forms. Good luck, but like everyone says its the hands on approach that works best- a local club. R