Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Man, am I tired...

Posts

Man, am I tired...

#1

Steven Antonucci

Man, am I tired...

steve antonucci

>So yesterday, I was digging a trench in 85 degrees and told my son we'd "go camping" on the deck. Well, my wife didn't let me back out of it, so I slept in my bag in a tent from 10:30PM to 3:30AM before I couldn't take it any more. Slept is an exaggeration. More like laid there wishing it was morning, closing my eyes, and trying to get comfortable for 5 hours. He made it until 6AM when he woke up alone and came into see me on the couch in my bag, since my daughter decided to take my spot in my bed. But I digress...

So with a limited amount of sleep and soreness everywhere, I decided to embark on a "big turning project" (for some crazy reason...) I have a bunch of this spalted maple in my waiting for inspiration stock pile, and I had roughed this piece round with two tenons on either end. I changed out the spigot jaws on my Super Nova II for the 55mm long nose and rerounded.

The roughout proved that the surface finish would be difficult at best. The end grain tore out with a gouge, so I used a skew to get a pretty good finish. Since the piece was so large (10" H x 8" W), I knew that I would never get a perfect surface off of the tool and sanding would be a dusty mess with soft and uneven spots from the hard and soft woods. Dilemma. How to finish?

I recently saw a few Ellsworth pieces and recalled a conversation we had when I was a student a few years back. He mentioned that he didn't care to sand his pieces to 10M grit because it robbed the work of the makers hand. Now, David is either a genius (who doesn't want to sand) or making a point. When I looked at his work, there was clear evidence that he practiced what he preached. Tool marks.

As I sat, aching in my chair, it dawned on me that this piece of decaying wood really didn't need to be sanded. At all. The surface is far from polished, but it is "perfect". It highlights the various stages of decay, from "crappy wood" to world class spalting. There are cracks in the wood that were there when I cut it down to throw it in the back of my truck with Andy DiPietro last summer. It would be an insult to the wood to "polish" it.

So I set out about hollowing it. Normally, I'd aim for 1/4" or less in something this big, but with the cracks and the spalting, I'm guessing that I left this one marginally thicker to avoid losing it in some turning catastophe. During the effort, I made some tools, changed some tools, and even debated rewiring the switch on my lathe for remote access. I took about 5 hours to shape and hollow it , and I'm pretty happy with how it came out. I'm most likely going to wire brush the outside and bleach it, and then lightly lacquer it.

As usual, comments and such are welcome...

Steven


img

Re: Man, am I tired...

#2

Re: Man, am I tired...

Norm Smith

>Steve, It sure looks good to me. I think that you have the right approach for this beautiful piece of spalted maple.

Norm

Re: Man, am I tired...

#3

how refreshing...

GaryG in MD

>Steve,

I couldn't agree more. Some pieces benefit from a smooth, shiny surface, and some don't. I came to the same conclusion recently while making some mushrooms out of a maple branch that fell in our back yard. I made the first couple smooth, and then said "wait a minute" -- mushrooms aren't smooth and shiny in real life, so why should wooden ones be so. I started cutting against the grain in some places to purposely rough them up! I like them better that way -- much more realistic.

Your HF is very nice, and I agree with everything you said -- except maybe the bleaching part -- I'd leave it just like it is and finish it with Krylon or something like that that does minimal darkening.

Nice work, Gary

Re: Man, am I tired...

#4

Re: Man, am I tired...

Texian

>Appears to be a gor-geee-ose piece as is. Why do you want to bleach it? Read somewhere that bleaching makes the light wood lighter and leaves the dark spalting as is. Yes/no??

Re: Man, am I tired...

#5

Re: Man, am I tired...

George Van

>Well done Steve, I too would question the bleach as the color seems light and natural at this point. Maybe I will be surprised by the change if you do bleach it. If you do please post the finished piece.

Re: Man, am I tired...

#6

Re: Man, am I tired...

Cyril Griesbach

>Beautiful piece, Steve. Spectacular spalting on this wood. Leave the bleach in the laundry room.

Re: Man, am I tired...

#7

Steven Antonucci

Bleaching responses-

steve antonucci

>I've bleached spalted maple before (from this log) and the other ones get ghostly white. The spalt lines have turned a dark brown in the other piece, which is the only thing that has me hesitating to do it here...

Weekend is over, so I won't be doing anything during the week. I'm in DC later this week, which gets me out of the shop.

I've attached a pic of

Re: Man, am I tired...

#8

Steven Antonucci

Coffee hasn't started working yet...

steve antonucci

>hit post instead of picture... duh.

Here is the picture I meant to post from Totally Turning. It is the tall pot in the backdrop that is spalted and bleached.

Steven

P.S. A drive by gloat- Mary Lacer of the AAW called me a few weeks back and asked if I would send the three elm hollowforms for an exhibit called "Rounding the Four Corners". I was told that Alan Lacer had "juried" me in. They were shipped last week.


img