Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Olive Wood Question

Posts

Olive Wood Question

#1

Olive Wood Question

Ron In Sterling CT

>In the spring of 2007 an olive tree was cut down in the complex where we winter in Scottsdale, AZ. I got several pieces of the log about 16 inches long and 7 to 9 inches in diameter. I painted the ends and put them on our patio to dry over the summer. About a month ago I cut several of them into 5/8 inch slabs on the band saw with the intention of making some boxes. Man what beautiful grain. I also cut several turning blocks out of some of the log. I just receieved an email from a friend who was told by a turner that "the wood is POISON. It is an irritant to the skin when touched and the dust is harmful to the lungs". I have never heard anything like this before about olive wood. Can any of you knowledgeable people shed any light, good or bad, on this subject? I have also posted this on the main message board.

Re: Olive Wood Question

#2

Re: Olive Wood Question

Sam Scalzo

>I have turned a lot of olive wood and have had no problems. This is the first time I have heard this. I have some drying that was cut about a year ago. It will crack some even being sealed. I do a lot of inlay and it turns out fine. Sam in Tucson

Re: Olive Wood Question

#3

Re: Olive Wood Question

Allen Neighbors

>I've never turned any of it, but I'm going North a hundred or so miles to get a trailer load of it this summer. I'll be watching this thread with interest. Thanks for posting.

Re: Olive Wood Question

#4

Re: Olive Wood Question

Mike Rubes, Apex, NC

>Hi Ron,

I've turned a dozen or so pieces from olive and have never had any trouble with a reaction at all. In fact, it is one of my very most favorite woods to turn. I've turned some grown in California and from the Mid-East, never with a problem.

I love the way it works and the smooth finish you can get out of it.

I would defer to any of the real experts on this board, but from my novice view, it has never seemed toxic to me.

Good luck,

Mike

Re: Olive Wood Question

#5

Re: Olive Wood Question

Jim Pugh, Elyria, OH

>If it is poison, how do they account for all the food service items made from olive wood? ie salad servers and such? It has been sold for turning and salad bowls for use for years. By the way, the common ash tree is of the same family and my bowls haven't sickened anyone yet.

Re: Olive Wood Question

#6

Re: Olive Wood Question

Bill Neddow

>I just checked through my pile of "Potentially Toxic Wood" lists downloaded from the Internet. Some do not list Olive. However, the archives of the Musical Instrument Makers Forum (http://www.mimf.com/archives/toxic.htm) has the following information:

Olive:

Class: Sensitizer (which may have a latency period of hours or months and may require repeated handling before reaction occurs.

Reaction Category: respiratory, eye and skin irritations

Potenct: great

Source: dust, wood

Incidence: common.

Now before you get scared off, compare it to Rosewood, which has the same listings but whose potency is "extreme"

So wear a dust mask, cover your skin, and you should be fine.

Re: Olive Wood Question

#7

Re: Olive Wood Question

Curt Fuller

>http://www.ci.tucson.az.us/arthazards/wood2.html

In this chart Olivewood is listed as a sensitizer and irritant, but to a lesser degree than the rosewoods. So I would take that to mean that it would be a good idea to wear breathing protection while turning and sanding. I've turned quite a bit of olivewood without experiencing any problems and I kind of like the smell of olivewood when turning it. But that doesn't mean some folks wouldn't have problems with it.

Re: Olive Wood Question

#8

Re: Olive Wood Question

eaglesc

>Did your friend end his e-mail with:

"Send it to me and I will dispose of it properly"?

Re: Olive Wood Question

#9

Re: Olive Wood Question

Barry Turner

>I think your "Friend" has a woodturner friend who is trying to rain on your parade. There's a reason they call jealousy the "Green Monster".

Although I've never turned anything larger than a winestopper from Olivewood, no wood I have ever turned has produced a more beautiful winestopper. It turns beautifully, sands so smooth you hardly need a finish and smells wonderful as you turn it. I usually have a rash (contact dermatitis) when I turn Cocobolo or Kingwood, but have never has a problem with Olivewood. If you are still worried about your good fortune, I'll send you my mailing address and a prepaid mailing label. :-)

Re: Olive Wood Question

#10

Peter Charles Fagg (UK)

Re: Olive Wood Question

Peter Charles Fagg (UK)

>Turned Olive wood some years ago but never had any reaction to dust, wood or using the bowls for salads etc!

Regards, Peter

Re: Olive Wood Question

#11

Re: Olive Wood Question

Rick Davenport

>Every wood is toxic to someone.

Some woods are toxic to more people - like cocobolo, rosewoods and cedar.

Walnut gives me a raging headache, so I stopped turning it.

I've turned a bunch of olive wood with no ill results.

And I love the smell of fresh cut olive wood.

It smells like ....... olives!

(imagine that)

I will certainly take my place in the line of volunteers to take it off your hands!

R

Re: Olive Wood Question

#12

Re: Olive Wood Question

Ron In Sterling CT

>He knows better than to do that.

Ron

Re: Olive Wood Question

#13

Re: Olive Wood Question: Thanks for the Input

Ron In Sterling CT

>Thanks to everyone for your responses. I never cease to be amazed at the information that can be gleaned from Wood Central. I also appreciate the offers to take all this "supposedly toxic" olivewood off my hands. However, based on your input, I have decided to don the ole dust mask and have at it. I didn't get any reaction while bandsawing it without a mask, so with a little protection I should be okay.

Ron

Re: Olive Wood Question

#14

Dang!

Rick Davenport

>

Re: Olive Wood Question

#15

Re: Olive Wood Question

Colin Spencer

>Ron

I turn lots of it both wet and dry and have never had a problem with it. The only real problems are it takes an age to dry, checks given the slightest excuse, and if you turn it whilst its wet the sap in the shavings instantly rusts steel and it can leave a sticky residue on your tools. Even then it is still one of my favourite woods. Like other comments have said take appropriate safety precautions and I am pretty certain you won't have a problem.

Colin