Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

WooHoo..got my Jet 1642 today

Posts

WooHoo..got my Jet 1642 today

#1

WooHoo..got my Jet 1642 today

Jim(IN)

>Been a lurker and knowledge gatherer here and other websites for quite some time and have yet to make anything that I want to post except for a few pens and a very basic segmented bowl or two. You folks are an inspiration to all of us beginners and I want to thank you for all your shared knowledge. I have been basically a flat woodworker over the years but due to job, life changes haven't done much of anything in the last few years.

After months & months of looking and wishing and looking and wishing and more looking and more wishing & drooling with a little begging thrown in too, I finally got my Jet 1642 that I've been wanting. Wife said last week to go ahead and get what I want(mustard monster?) so I decided on the Jet due to budget considerations. Have been working on a Jet mini for a few months and seem to be doing OK. Wanted to take that step up.

Now that I have a bigger lathe does that mean my catches are going to get bigger and the bowls fly farther? If so please someone post a phone number for NASA so we can put them on alert.

When you got your lathe what was the best things to turn for practice? Did you start off with green blanks, store bought blanks, etc?

I currently have Bill Grumbines DVD's on order. Probably get here early next week.

Thanks

Jim

Probably won't be able to sleep tonight, just like a kid at Christmas.

Re: WooHoo..got my Jet 1642 today

#2

Re: WooHoo..got my Jet 1642 today

Jennifer@Indy.USA

>Jim congrats on the new lathe. It was nice bumping into you today at Woodcraft!

Enjoy your weekend.

See you Monday.

Jennifer

Re: WooHoo..got my Jet 1642 today

#3

Re: WooHoo..got my Jet 1642 today

Pete in Holland, MI

>Have had one now for 2 years. If you're gonna be turning bowls, build the weight box for between the legs. Some folks just pour in sand. Nice weight, but a pain next time you want to move it. Filled mine with plastic bags of small stones & works fine.

Word of caution: Turning your first bowl that takes up all of the swing of the lathe will be scary at first, and quickly show you how small your bowl gouge probably is.

Ahhhhh........the slippery financial slope of turning. Hang on ! It's gonna be a fun ride !

Re: WooHoo..got my Jet 1642 today

#4

Re: WooHoo..got my Jet 1642 today

Bill Howatt

>Nice buy and I'm sure you will really enjoy it.

Since you are still fairly new at this, I would rough turn green wood (read cheap, free, firewood or whatever) rather than store bought blanks which can be expensive. This way you can practice your shaping and techniques without crying if something goes wrong. Green wood is more fun anyway - just whatching the chips fly!

Put the rough turned bowls away for a few months and then finish turn them or you can turn them all the way to finished an let nature take its course with the final shaping as the bowl dries.

Doesn't mean you can't buy any dry ones though. :)

Bill

Re: WooHoo..got my Jet 1642 today

#5

Re: WooHoo..got my Jet 1642 today

John K Jordan

>Oooo! I have the 1642 and it is a dream. I've turned 15" bowls, 1/4" goblets, a shovel handle from hickory, and nearly everything inbetween. I love the variable speed. The catches and launches will actually be smaller and milder since you can turn the speed way down at a touch.

As for practice - use cheap wood! 2x4 pine, old 4x4 (not pressure treated), anything green which is usually free. If you like spindle turning (my favorite), the best practice I found is described in either Raffan's book and Darlow's book - take a 2" square about 12" long or so, make it round, mark it off and make some beads, cut down the beads into coves, turn them all off and make a cylinder again, then repeat until there is no wood left. If you do this with a skew, by the time you run through six or eight of these you will be an expert with a skew! I'd save anything that cost money for later! (After some years, I still have chunks of wood I don't feel qualified to touch.) Same thing with bowl practice, but bowls aren't nearly the challenge. I used to glue up 1" flat stock for cheap bowl turning practice.

BTW, the first thing I did to mine was fasten a rectangle of low-nap weave carpet with a tight weave (actually a piece of floor mat found at a truck stop) to the top of the headstock. I used double-sticky tape. This makes a great place to rest my arm when using the left hand as a steady rest on long thin spindles, a good place to set things temporarily, and a good flexible backing for a piece of sandpaper or cloth with a drop of friction polish when hand finishing the parted off end of a spindle turning.

The second thing I did was make a little sliding tool tray that rests loosely in the gap in the lathe bed. This also has a piece of the carpet and is a far better place to temporarily set a tool when switching between two or three. (picture attached)

JKJ


img

Re: WooHoo..got my Jet 1642 today

#6

JL

Re: WooHoo..got my Jet 1642 today

JL

>Build yourself a ballast box/drawer unit. I modified Dominic's plans (see Articles section) and put a drawer unit on top.

As far as "practice" wood - anything you can get your hands on. If you want to do kiln-dried, keep your tools sharp.


img

Re: WooHoo..got my Jet 1642 today

#7

Re: WooHoo..got my Jet 1642 today

Jeff Rich

>Congrats on the new lathe!

I love my 1642, it has helped further my skills as a turner.

I hope you enjoy !