Rose Engine Turned Acrylic Bowl
Ed Davidson (Colorado Springs)
>Looks just like cut crystal...acrylic bowl measuring 1" x 3". lathe turned and embellished on a rose engine.
Knowledge You Can Build On — Est. 1998
Rose Engine Turned Acrylic Bowl
Ed Davidson (Colorado Springs)
>Looks just like cut crystal...acrylic bowl measuring 1" x 3". lathe turned and embellished on a rose engine.
Re: Rose Engine Turned Acrylic Bowl
Norm Smith
>Ed, That is amazing. Nice work.
Norm
Re: Rose Engine Turned Acrylic Bowl
Wayne Kuhn
>Neat!! How were they sanded??
Re: Rose Engine Turned Acrylic Bowl
charlie belden
>It's sometimes a pity that wood is opaque. The way your piece plays with light and blurs what's "inside" and what's "outside" allowing the two to interact - really interesting.
I don't have the patience or discipline to use a rose engine - but I can appreciate many of the pieces created using one - your piece for example.
charlie belden
Re: Rose Engine Turned Acrylic Bowl
Juergen
>Ed, when is the demo at the club?
Re: Rose Engine Turned Acrylic Bowl
Ed Davidson (Colorado Springs)
>Turned on a standard lathe, wet sanded to 600 grit, chucked onto the rose engine using the same scroll-chuck setup, RE embellished, and finally...Beall buffed with tripoli and white diamond.
Re: Rose Engine Turned Acrylic Bowl
Ed Davidson (Colorado Springs)
>Juergen,
If you'll help me haul it over there, it'll be done.
Re: Rose Engine Turned Acrylic Bowl
Juergen
>Sure, I just got a new pickup. Let me know when. I've been thinking of building one after I saw the demo in Portland.
Re: Rose Engine Turned Acrylic Bowl
eaglesc
>Though I can appreciate the time that went into the piece it would seem to me that since you cast so much acrylics it would be far less time consuming(read $$$$$$)to buy a glass bowl at the dollar store make a mold and cast it in resin.
Re: Rose Engine Turned Acrylic Bowl
john lucas
>Ed Thanks for posting. wonderful piece. You've excited my desire to work in that direction again.
I have been fascinated by this process for many years but my early investigations into the process made it look like it would cost thousands to get into it and you could only turn really expensive woods.
I'm finding now that you can build the rose engine yourself and not have a ton of money in it. I'm also finding that you can use less expensive woods and since acrylic and other plastics are reasonable in price it becomes a hobby that is at least approaching affordable.
I haven't figured out how to find the time yet to do it.
Re: Rose Engine Turned Acrylic Bowl
john lucas
>Eagle, by casting someone else,s work you give up all the creativity. Not that you couldn't hand carve all the pieces and then cast that but if you had that skill you wouldn't need the rose engine. :)
LOL
Ron in Drums PA
>No offense Ed.
An OT is on my list of tools that I need. I may even turn a "crystal bowl"
The very first thing I turned on a lathe was a dowel. It took me about 2 hours to complete.
I showed it to my father and he said, "You know, it would have taken you less time to drive to Lowes and buy one."
I proudly replied, "But It was square when I started!"
I was pleased that I figured out how to make something square round, but I now I go to Lowes to buy my dowels.
Re: Rose Engine Turned Acrylic Bowl
John K Jordan
>>...buy a glass bowl at the dollar store make a mold and cast it in resin.
I agree that it would be cheaper to cast a copy but hey, who made the original mold for the dollar store bowl, and how? If the object was to produce or simply possess a copy of any existing bowl (or pen or pepper mill), there would be no reason for anyone here to spend $$$ on lathes, rose engines, or CNC machines.
In fact, inverting the concept, an entrepreneur might even make some $$$ creating unusual and beautiful molds for the glass casting industry.
Ed, this piece immediately hit me as exciting for the creative thinking to do it in the first place, it's uniqueness, and potential. Can you share your source for big chunks of acrylic?
JKJ
Re: LOL
Curly Smith
>See! With the proper tools you can fit a square peg in a round hole!
I'd swear I was looking at....
Ray Carson - Lawrenceville, NJ
>glass or crystal. That's amazing. I have no idea what a rose engine is but I'm assuming that's how you put the perpendicular cuts in your piece.
Very nice piece Ed! A whole lot cheaper than real crystal too, right? :-)
Ray
Re: I'd swear I was looking at.... *LINK*
Curly Smith
>You'll find info and plans at the link.
Note: the link is a PDF and may take some time to load.
American Woodturner Article
Re: Rose Engine Turned Acrylic Bowl *LINK*
Ed Davidson (Colorado Springs)
>Thanks everyone.
John, I get all my cast acrylic rod from Delvies Plastics...link below. Be sure to get cast and not extruded rod. It's much easier to turn and not as likely to melt, burn or chip-out. BTW, the rod listed on their site only goes up to 2" diameter. You'll need to call in a special order for larger sizes. I started with 3" clear, un-polished cast rod.
Delvies
Re: I'd swear I was looking at.... *LINK*
Ed Davidson (Colorado Springs)
>Ray,
I've got several short videos up on my site that show how a rose engine works. Most were shot last month in St Louis, at the manufacturer's shop...got a two day hands-on training session when I picked up my machine. Note the link below to my tutorial page and look for "Rose Engine" videos.
Rose Engine Lathe Videos