Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Swinging Lathe Light...

Posts

Swinging Lathe Light...

#1

Swinging Lathe Light...

Allen Neighbors

>Well, actually it doesn't swing, but it is a swingin' light.

Thanks to Gary for posting the photo of his, and to John for locating it for me to look at.

This is the one I built out of 1/2" galvanized pipe fittings, and hung over my lathe. Nipples: two 2", two 12", one 8". Elbows: four. Floor Flanges: two. Tightened the long nipples and elbows wrench tight. The two short nipples are just hand tight, so they'll move, allowing the arms to swing. Always swing it the same direction, so the wire doesn't twist.

I threaded the electrical cord through each piece as I screwed it together, so it wouldn't be twisted up inside the pipe. I put two lights on it... the little cheapie desk lamps from Walmart, with the weights removed from the bases, and just screwed onto the board. I left the wiring in the open, in case I needed to lengthen or shorten the last section.

I used it yesterday afternoon and this morning, and it's perfectly positioned, so now I need to box in the wiring.

Thanks again, Gary and John!


img

Re: Swinging Lathe Light...

#2

Re: Swinging Lathe Light...

Allen Neighbors

>Here it is extended over the outboard end.


img

Re: Swinging Lathe Light...

#3

JL

Re: I still prefer my track lighting system

JL

>that way I can have the multiple lights as well as the swinging portion.

Re: Swinging Lathe Light...

#4

Re: Swinging Lathe Light...

Norm Smith

>Allen , that looks great. I gotta do something like that. Nice job.

Norm

Re: Swinging Lathe Light...

#5

Re: Swinging Lathe Light...

Allen Neighbors

>Thanks, Norm. It cost me just a shade over $25, lights and fittings.

Re: Swinging Lathe Light...

#6

Re: Swinging Lathe Light...

Lan Brady

>great job Allen!

Lan

Re: Swinging Lathe Light...

#7

Re: Swinging Lathe Light...

Allen Neighbors

>Thanks, Lan... well.. it works. :)

Re: Swinging Lathe Light...

#8

Re: Swinging Lathe Light...

Jim Pugh, Elyria, OH

>Sometimes we just have to make the first one so we then understand how to make the one we really want. Consider this one as your Mark I version. After you live with it for a while you will know what is needed to make the Mark II.