Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

dowel mirror

Posts

dowel mirror

#1

dowel mirror

john lucas

>I tried something new on this mirror. I cut 3 grooves using a roundover router bit and then glued a dowel into the grooves, Then I turned the dowel away while I turned the face of the mirror. I have done a similar technique before by drilling holes in the end of the mirror and inserting dowels. This technique uses less wood but is difficult to hold the mirror blank while routing. I may try vacuum clamping to hold it and do it on the milling machine instead of my router table.


img

Re: dowel mirror

#2

Tagua dots mirror

john lucas

>I've been working on my demo for the Ricmond symposium. This is one of the techniques I will discuss. I used a plug cutter to cut out Tagua nut plugs and then insert them into holes drilled using a homemade drill guide and index plate.


img

Re: dowel mirror

#3

Re: dowel mirror

John K Jordan

>Nice! You would make great use of a CNC machine.

JKJ

Re: dowel mirror

#4

Re: dowel mirror

Norm Smith

>John, I really like the one with the dowels.

Norm

Re: dowel mirror

#5

Mike Stafford

Re: Tagua dots mirror

Mike Stafford

>Both are very nice, John but I really like the tagua nut inlays. Very orderly and symmetrical.

Re: dowel mirror

#6

Re: Tagua dots mirror

john lucas

>Thanks Mike. There are better ones in the works but for the next 2 weeks I'll be working day and night at work so not very much turning will get done. I just looked at the calendar and I have 4 evenings and this Sunday off. The rest of the time I'll be working. I hate the end of spring semester it's a nighmare culminating in Graduation where I have to do a photo of over 900 graduates.