Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

firewood

Posts

firewood

#1

firewood

John K Jordan

>Splitting firewood this past fall, I threw aside a few interesting pieces of white oak that suggested interesting figure. The small bowl here is only 4" in diameter. The base is 2.5", height 1.3". The heavy wood and relatively thick wall (.25") makes it feel nice in the hand even though it is small. Some of the small bowls I've made with thin walls seemed too light to me.

This is from a limb of a 30" diameter tree I had to take down because it was too close to my planned workshop.

I thought this might be interesting since I don't see too much made of white oak posted here.

JKJ


img

Re: firewood

#2

Re: firewood

Texian

>Very cool rim detail!

Re: firewood

#3

Re: firewood

GaryG in MD

>That's nice, John. I like oak -- it has all kinds of interesting stuff going on, what with the rays, grain, potential spalting, etc. I agree that it seems to be underrepresented. ...Gary

Re: firewood

#4

I see this bowl

Steven Kubien

>and it's beautiful rim holding just enough peanuts for a light snack. I like it (the bowl, not just the peanuts).

Steve Kubien

Re: firewood

#5

Re: firewood

Sean Troy

>Nice save !

Re: firewood

#6

Steven Antonucci

You must have sanded it for days...

steve antonucci

>Most of the figured white oak I've turned never gets that smooth. I had tree quartersawn in my flat days that was at least 4' in diameter, and it has some of the same figure.

Good white oak is as good as any wood out there in my book. Your little bowl would be a great candy dish. I also like the rim detail (as previously mentioned).

Steve

Re: firewood

#7

Re: You must have sanded it for days...

John K Jordan

>Actually, the sanding was minimal, after one coat of sander sealer. I do almost all of my sanding by hand with the lathe turned off.

Re: firewood

#8

Re: firewood

Gary Evans Tallassee, TN

>Very pretty, John.

I'm also puzzled by the lack of use of this particular wood by wood turners. White and red oaks can both have beautiful figure and color.

I've only been asked at one show out of the several I've done whether I had any oak blanks. I was actually surprised to hear somebody ask for it.

Gary