Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

making drums round

Posts

making drums round

#1

making drums round

matt

>hey everyone, i was wondering how does one go about making drums perfectly round on a lathe. ive made a few using a bowl gouge but took quite a while. the kinds of drums ive made are segmented and stave constructed. does anyone know whats the best way to turn these kinds of drums inside and out. i know of some small custom companies that make drums in this fashion from 8" all the way up to 26" in diameter. Theres no way they're turning by hand with the ammount of drums they're putting out. what kind of lathe or machine can make these glued up drums round inside and out? none of these companies will tell me how they do it for business reasons (go figure) but i know there has to be someone or some people in these forums that can point me in the right direction with this. I just need to know what kind of machine they are doing to make it happen. it cant be impossible right!!!?? :) ive been trying to find out how to turn drums of these various sizes for a while now for production purposes. i would appreciate anyones feedback and expertise

Re: making drums round

#2

JL

Re: Woodweb has an article  *LINK*

JL

>


Woodweb Turning Solid Wood Drums

Re: making drums round

#3

Keith Tompkins

Re: making drums round

Keith Tompkins

>HI Matt, Drum manufacturers, like almost all industrial woodworking done today, employ CNC machinery to produce drum shells. The shells are laid up with various ply layers over a mold with a "show" veneer to finish each unit.

For the staves you are using, you will need to fabricate your own clamping and chucking methods.

Re: making drums round

#4

Re: making drums round

Tim Grenville-Cleave

>I know Snare type drums are made by using lengths of thin wood of your choice (length = dia of drum + joint.) The wood is prepared for jointing with a 'scarfe'(sp) joint then steamed. once pliable it is bent round a former, the joint glued and the whole lot clamped to the form. when dry it is trued up inside and out on a lathe. The 'drum' is lightweight and easily clamped with a button type jaw. As for skinning and tuning ... not a clue!!

Re: making drums round

#5

Re: making drums round

Ken Grunke from SW WI

>Are you referring to hand drums like ashikos, congas, djembes, and the like? Or kit drums (snares, bass, etc)? Two different animals.

I used to make djembes and ashikos for a living and we never turned the inside. The guy I worked for held to the theory that some roughness on the inside improved the sound, whereas a smooth inside wall would introduce undesirable tones.

Most of what we produced (on a very limited production scale, 1-6 per day) were of staved contruction. I was the chief turner and jigmeister--that is, I designed and built the fixtures such as the tablesaw sled jigs for cutting the beveled angles on the staves.

No rocket science involved, we just used standard lever clamps and wood stop blocks on 3/4" Baltic Birch ply bases, with maple strips screwed to the bottom to run in the tablesaw's grooves..

If you are turning solid drums, you definitely need a good steady rest for hollowing and a beefy lathe. We used an ancient Oliver patternmaker's lathe with a 24" swing and a humongous 3 phase motor driving a 2 3/8" spindle through a flat belt drive. The biggest drum I turned was a 23" staved cylinder drum, called a djun-djun.

Re: making drums round

#6

How Its Made had a drum making episode

Pete in Holland, MI

>