Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Gloat or not?

Posts

Gloat or not?

#1

Steven Antonucci

Gloat or not?

steve antonucci

>So with much sadness, I must report the loss of my neighbors willow tree. Three houses went in together and at some point they all planted willow trees to try to suck up some of the extra ground water.

Sadly, my neighbors tree was on the ground last weekend. If a tree falls in the woods and no one hears it, did it make a sound? We may never know...

Now, this is not your ordinary weeping willow. You see, it has a trunk of approximately 20' in length completely covered in burls of all sizes. I almost feel like I jinxed it when I saw it the first time, but when I noticed it was laying on its side, I did a happy little jig.

I knocked one small burl off today, but spent 2 hours making it safe to cut around. There were limbs up in the trees, and various branches overhead. I did manage to have one hit me on top of the head (never saw it), but thankfully, I survived it.

So now the big question: Did I help my neighbor out of the goodness of my heart or did I clear all of the branches to get at a burl laden trunk?

Steven

Re: Gloat or not?

#2

Re: Gloat or not?

Carol - now in NC Nebraska

>Verily, verily, I say unto thee, always err on the side of kindness.

Amen.

Re: Gloat or not?

#3

Without pictures, it didn't happen!

Clem Wixted

>

Re: Gloat or not?

#4

goodness or greed

John K Jordan

>That might depend on whether you cleaned up the branches or left them for the neighbor. If necessary, guilt counseling will be provided upon receipt of a suitable chunk of willow wood in the new large size USPS Flat Rate Box.

BTW, the one on the head is called a "widow maker". I've been converted to a believer in these:


img

Re: Gloat or not?

#5

Steven Antonucci

Oh, I'll have pictures... :-)

steve antonucci

>I only cleared the limbs off for him today. I got to use my new Stihl timberjack and I have to say it's a whole lot better than muscling logs around.

I haven't turned weeping willow, but the wood appears very light in color and has an occasional brown spot. I knocked off one small burl (8" or so) and carried it up into the driveway. When I go back for the main trunk in a few days, I'll be sure to document it with pictures for a proper gloat!

Steve

Re: Gloat or not?

#6

Steven Antonucci

I'm creating jobs...

steve antonucci

>For his 17 year old son (who wanted nothing to do with helping me and his dad). We cleared some of it, but oddly enough, only by the burls :-)

There will be some to go around, John. A big flat rate box? Now that's greed... ;-)

Steven

P.S. Thought about the helmet right after it happened. Isn't that always the way?

Re: Gloat or not?

#7

Steven Antonucci

Picture for the non-believers!

steve antonucci

>just ran across the yard and took a quick snapshot of the main trunk. It's about 20" in diameter and 20' long. Now how do I get them out?

Steven


img

Re: Gloat or not?

#8

Piece of cake.

Brian Hahn in SW Wisconsin

>A Bobcat or compact utility tractor with a bucket can carry that out in 4 trips.

A set of logging chains and a good 4-wheel drive vehicle (or the tractor or Bobcat mentioned above) can drag it out.

Flat terrain, no boulders or big trees to dodge... Like I said, it's a piece of cake.

(Try taking logs like that up a 30� slope that is littered with car-sized boulders and big trees.)

Re: Gloat or not?

#9

Steven Antonucci

Except for a few simple things...

steve antonucci

>I don't own any farm equipment.

The ground I stood on is very soft. A tractor would sink in a foot.

Oh, yeah, it's also my neighbors yard and his septic field I'd have to drive across...

I think I'll end up cutting off the burls as big as I can load into a wheel barrow and then across his yard into mine...

My friends say I live in the country, but it's all relative. No tractors of firing a shotgun off of my porch in this neck of the woods...

Thanks for trying!

Steve

Re: Gloat or not?

#10

Re: Picture for the non-believers!

charlie belden

>Start with an undercut - then progressive V cuts from above - AFTER you've figured out which way you want the pieces to roll/fall / fall and roll?

Re: Gloat or not?

#11

Steven Antonucci

I think that's backwards?

steve antonucci

>I managed to cut most of the limbs down yesterday and only got the saw stuck one time. I think what you described will almost guarantee that I end up stuck?

Since the log is suspended off the ground, I planned on cutting a notch in the top about 1/2 way through, and then slowly upcutting into the notch. When the up cut just begins to open, I'd finish the cut from above with just the tip of my saw in a back and forth motion. The goal is to have the log slowly set itself down vs. crash to the ground. Once it is on the ground, I can cut it from above.

If I cut the wedge on top, it will close on the blade almost immediately when I come down from the top because the wood from below the cut is no longer there to support the weight. There were two trees that were caught underneath the willow that I worried would catapult me across the road when I relieved the tension, but I couldn't save either of them. Short of taking a limb to the head because I didn't see it and losing my balance while standing on a log and falling into the mud up to my knees, it was an uneventful session yesterday.

Steve

P.S. New series on History Channel called Axmen. Anyone else watching it?

Re: Gloat or not?

#12

Re: Picture for the non-believers!

John K Jordan

>>... how do I get them out

Steve,

Can you roll them to the road?

You can roll log sections of almost any size with a cant hook. I have one with a 60" handle that I've used on logs nearly 30" in diameter. Two cant hooks are better, with a third person to place chocks on the ground if rolling up hill.

Another way to move a log of almost any size is to wrap a chain or cable a number of times around the diameter such that the last turn comes off the top and towards the direction you need to go. When you pull the end with a comealong, 4-wheeler, or truck, the log will roll as the cable/chain unwinds. The ground is barely disturbed. You can use dual cables for a straighter pull. With a long cable, the pulling vehicle can stay off the soft ground. You get a lot of leverage this way and it really doesn't take much force. I've rolled huge logs up ramps onto my flat-bed truck using this method.

If you can get the logs to the curb or sturdy ground, you can easily hire someone to load and haul them if you don't have the means. I think Ellis once suggested using a towing company that has a car-hauling flatbed truck with a winch.

JKJ