Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Thinking of taking the plunge-tools? *LINK*

Posts

Thinking of taking the plunge-tools? *LINK*

#1

Thinking of taking the plunge-tools? *LINK*

Tony Sade (Charleston, WV)

>I've long thought about taking the plunge into turning but serious space limitations in my small garage shop and what I've heard is the steep, expensive slope that will follow have stopped me. I've been leaning toward getting a mini lathe because that might be all that space allows.

Last night while cruising ebay I came across what I thought was a set of turning tools at a low price, and without an apparent thought (an all too common occurence, unfortunately) I placed a bid and won.

Now I'm wondering:

1. Are these even turning tools? (The seller simply described them as "woodworking chisels".) I think they are, but what do I know?

2. Will these be a decent starter set, or should I put them back up for auction and look elsewhere, with some thought actually involved?

3. Any idea what the alleged missing 8th tool might be?

Thanks,

Tony


Turning tools?

Re: Thinking of taking the plunge-tools? *LINK*

#2

Re: Thinking of taking the plunge-tools?

john lucas

>Tony That looks like a decent set of tools. I don't know if they are HSS or not. If not they are still good tools you just have to sharpen them more often and take care not to overheat the edge. If you can get High Speed Steel tools you are better off. Some of the old Craftsman tools were HSS and some were older Buck Brothers carbon steel tools.

Re: Thinking of taking the plunge-tools? *LINK*

#3

Re: Thinking of taking the plunge-tools?

Carol - now in NC Nebraska

>If nothing else, you have a set to practice sharpening and trying out different grinds.

Now get the lathe.

I hawked ebay until I found a Jet mini with a decent buy now price and close enough to go pick it up to save shipping. I have since spent 4-5 times as much on the toys that support the lathe. Maybe more, but that's all I'll admit to. No spouse to rationalize the expense and I just plain don't really want to know. What's the fun in that?

This slippery slope is lined with money. As you slide down, it slips away.

Re: Thinking of taking the plunge-tools? *LINK*

#4

Re: Thinking of taking the plunge-tools?

Cyril Griesbach

>Slide on in, Tony. The water is fine and creatures are friendly. The expenses are something we all have to deal with no matter the endevor. Fact is, turning is so much fun that most of us just want to get deeper and deeper but it's still an individual matter.

Re: Thinking of taking the plunge-tools? *LINK*

#5

Re: Thinking of taking the plunge-tools? *LINK*

Juergen

>Looks like the bidding is over. I've bought some of the Craftsman High Speed Steel HSS tools and they are worth the money. Sears still sells then in their catalog for < $15 per tool. If you're just starting I suggest getting the HSS set sold by Harbor Freight for <$40. see link below.


HSS Turning Set

Re: Thinking of taking the plunge-tools? *LINK*

#6

Hey, Tony. The 8th tool...

Allen Neighbors

>looks like it must have been a 3/4" or 1" Skew. The 7th appears to be a 1/2" Skew.

Yep, they're all turning tools... you may as well get you a mini-lathe.

A Vicmarc VL100 Bench Model Lathe is one that will last longer than we do! Not cheap, by any means, but well worth the price.

Re: Thinking of taking the plunge-tools? *LINK*

#7

Re: Thinking of taking the plunge-tools?

Lynn Edwards

>Tony,

I use a similar set of Craftsman tools for doing spindle work. They have lasted many years. Research and purchase a good sharpening system and have someone show you how to use it. Two years ago the old Craftsman tubelar bed lathe was upgraded to a Jet 1642. Now I have bought bowl gouges and heavy scrapers, all my tools for hollow forms are home made. You don't have to have every tool made, become very skilled with the ones you have(that is easier said than done). I still have more invested in a fishing boat then in all my turning stuff. Keep it simple and have fun!

Re: Thinking of taking the plunge-tools? *LINK*

#8

Thanks, and a followup ?

Tony Sade (Charleston, WV)

>Thanks for all the responses. My compressor just died and a replacement is a higher priority right now, but I do have a birthday coming up this summer.

The tools have arrived, and I'm wondering if it's possible to tell whether they're HSS just by looking. They have a shiny look-almost like chrome--except on the business ends. No other markings. Does that mean HSS or not?

Cheers,

Tony

Re: Thinking of taking the plunge-tools? *LINK*

#9

Re: Thanks, and a followup ?

Don Orr

>Tony,

The easiest way to tell High Carbon Steel from High Speed Steel is to touch them to a grinder. HCS will have bright yellow sparks that look like a July 4th sparkler, HSS will have dull orange sparks.