Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

OT: Looking for a source of Paulownia

Posts

OT: Looking for a source of Paulownia

#1

OT: Looking for a source of Paulownia

tm

>My brother wants lumber to build a traditional Polynesian surfboard.

I found out its native to SE Asia but its planation grown here in

the SE USA. Does anyone know a vendor?

Thanks,

John

Re: OT: Looking for a source of Paulownia

#2

Re: OT: Looking for a source of Paulownia

john lucas

>Try Jeffries woodworks near Knoxville, Tn. I'm pretty sure Winell Lee in Cookeville, Tn. also carries it.

Winell Lee Speciality Hardwood & Moulding 931) 526-2591 1235 S Willow Ave, Cookeville, TN 38506

Jeffries woodworks,inc 8807 Valgro Rd. Knoxville,Tn 37920 865-573-5876

Re: OT: Looking for a source of Paulownia

#3

Re: OT: Looking for a source of Paulownia

Ralph

>John

Is your brother certain he really wants to build a surfboard out of Paulowinia.

I've never surfed, but I have worked Paulowinia a far amount, plus I professionally work with ships. I have -SERIOUS- doubts that a Paulowinia surfboard would survive the forces in a wipe-out. The wood is very light and not remotely strong.

TTFN

Ralph

Re: OT: Looking for a source of Paulownia

#4

Re: OT: Looking for a source of Paulownia

tm

>Thanks John!

Re: OT: Looking for a source of Paulownia

#5

Re: OT: Looking for a source of Paulownia *LINK*

tm

>"The board looks like a bookshelf with a rounde end: three solid pieces of paulownia 7'7'' long, 15'' wide and barely 1/2 inch thick. No fin.

There's a ton of theory to the flex and bottom, but if you aren't

aware that Tom Wegener (the shaper) is a genious, it might just look

like a plank of wood."

Surfing Magazine May 2008

http://surfinoregon.blogspot.com/2007/06/alaia_10.html


http://surfinoregon.blogspot.com/2007/06/alaia_10.html