Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Beginner turning problem

Posts

Beginner turning problem

#1

Beginner turning problem

Mark Trulock

>I have been turning less than a year, I mostly make pens. I was frustrated with a bowl class I took yesterday through no fault of the teacher. I tried hard but I did not progress.

He worked with me a lot, but I was unable to make a curve on a bowl. I can ride the bevel on a straight cut but I can't seem to make a true bowl. I have a similar problem with spindle work making a bead. All my beads end up pointy. I am at a loss to explain this.

I've tried several DVDs and other teaching methods. My favorite cut in woodturning is the planing cut with a Skew chisel (thanks to the Lacer DVD).

Anyone got any advice?

Re: Beginner turning problem

#2

Re: Beginner turning problem

Carole Valentine

>That's a little baffling. Is it the inside or the outside that you have the most problem with? What tool? Are you rolling the tool at all? Are you using your body or do you hold the tool out from your body and just move it with your hands? Without seeing you actually turning, it may be a little hard to figure out, but there are a lot of teachers around...someone can probably help.

Re: Beginner turning problem

#3

Re: Beginner turning problem

Lan Brady

>Mark,

When I started, I found the bowl turning video's by Del Stubbs and Bill Grumbine to be the most informative piece of information out there. I prefer their video to live demostration. You can stop, back up and do it again.

Next, just practice, practice, practice.

Using firewood does not cost anything, becasue you can still burn it later.

My similar experience to your description was solved when I quit using my arms to move the tool and began using my body to sweep left to right. This allowed my arms to just move up and down.

Good luck on your venture, Lan

Re: Beginner turning problem

#4

Swing The Handle....

Wally Dickerman in Arizona

>And watch the cut being made on the profile of the bowl instead of watching the tool. On the inside of the bowl make an effort to turn a mirror image of the outside of the bowl.

Wally

Re: Beginner turning problem

#5

Re: Swing The Handle....

john lucas

>I'll add to Wally's excellent advice. The bevel is like an arrow. You point the arrow where you want it to go. By watching the outside of the bowl and moving the handle to shift where the arrow is pointing you should get the shape your after.

When you get a pointy bead it is usually because you are rolling the gouge but not moving the handle left or right. To find out how far you have to move the handle set the tool on the side of the bead with the bevel flat on the side of the bead. You'll notice that the handle will have to be moved a fair amount for the bevel to rub on a square sided bead. This is just like the arrow mentioned above.

Re: Beginner turning problem

#6

Re: Beginner turning problem

Mark Trulock

>Thanks a lot for the advice. Now its time to practice.

Thanks again

Mark Trulock