Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

LED W/Pics

Posts

LED W/Pics

#1

LED W/Pics

Ron in Drums PA

>By accident today I found a Harbor Freight store, about 20 miles from home, I never knew it existed.

Most of the stuff is junk, but they had this LED lights for $10



http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95414

As luck would have it, the bracket on the 3520 works perfectly to hold the light

As you can see it lights up the inside of this canister really nice




Here is the beginnings of a small box, the light worked great.


Re: LED W/Pics

#2

Re: LED W/Pics

Allen Neighbors

>That's nice to know. Looks like a pretty good little light, too... not like the usual stuff that comes from HF. Thanks for posting!

Re: LED W/Pics

#3

Re: LED W/Pics

Ralph

>Part Number please

If you shop careful, there are some great deals to be had at HF. If you are careless, you can take home some terrible junk.

Re: LED W/Pics

#4

Re: LED W/Pics

eaglesc

>"Most of the stuff is junk, but they had this LED lights for $10 "

One mans junk is another mans treasure.

I've turned $400.00 pens with their "cheap"$12.00 turning chisels.

My compressor is HF.

I ahve made mobile bases with their wire feed welder out of bedframe I cut with their $50.00 on sale "porta" band saw.

My digital calipers cost $16.00 on sale,I used them for 3years out of the box in the shop.

Hey some one has to keep the Chinese working.

Re: LED W/Pics

#5

Re: LED W/Pics

Gordon Seto

>If you look at the country of origin, you would notice that some of the low tech stuff are no longer come from China. They are replaced with countries I have no idea where they are.

HF is also my favorite store. They have very good customer service and return policy, considering the low price, expected junks that we are buying from them.

The 5 mm of my T handle hex key set was broken. I had it for several years. For $4 a set, I am not going to find my receipt. I was prepared to buy another set. It won't hurt to ask. The cashier just told me to get a new set from the shelf. There was no paper work, no id required for exchange.

Gordon

Re: LED W/Pics

#6

Re: LED W/Pics

Ron in Drums PA

>I purchased 3 items from HF that day.

One of them is the same (I think) digital calipers you and I spoke about in the past. While not the same fit and feel and my Starret vernier calipers, I consider it a good deal. I also own HF chisels and have recommended them to other turners as well.

They had two wood lathes on the floor, they looked seriously dangerous and should be outlawed. I've been looking around for a Cross-slide vise and they had four on display. I wouldn't waste my money on any of them.

I stand by my statement that HF sells mostly junk, but will revise it to say.

75% of the stuff they sell is junk and some of it looks dangerous.

---

Ralph:

There is a link in my first post for the light

Re: LED W/Pics

#7

Re: LED W/Pics

Randy G

>Ya know, they actually have a 3rd style of those lights too. A little bit longer arm on it. They are also great for checking the inside of some hollow forms. Thanks for posting the pic and Comment. I have the same lathe and never thought to try that light in the duplicator post.

Btw, I loved my Woodworking Bandsaw I got from harbor freight. If you watch what you buy, there's really great deals there. And if Eagle is using their turning tools to produce those pens. I'm convinced I've spent way to much on turning tools. :-) His work is awesome.

Re: LED W/Pics

#8

Andy DiPietro

Re: LED W/Pics

Andy DiPietro

>Hi Ron,

I have been using those lights for a few months now and they work pretty good for $9.99. I use mine for looking inside my hollow forms.

I tape the longer one to my hollowing tool which works well for illuminating the inside of a HF.

I will be going to the Richmond AAW in June, are you going?

Andy DiPietro