Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Face shield for demomeisters *LINK*

Posts

Face shield for demomeisters *LINK*

#1

Face shield for demomeisters *LINK*

Ed Karch

>Garret Wade (standard denial of connection with commercial intities)has a face shield made of metal mesh with a clear plastic view port. One could lecture through the mesh while looking through the clear view port at the same time protecting the schnozz from sudden design changes. Item number 19R06.01 It also has the advantage of not fogging in the hot soggy summer. It is on sale now.


face mask

Re: Face shield for demomeisters *LINK*

#2

Re:Thanks Ed- just what I have .......

Jamie Donaldson

>....been searching for! I ordered it already.

Re: Face shield for demomeisters *LINK*

#3

Re: Face shield for demomeisters

Doug Thompson near Cleveland

>This is the best shield I've ever seen!

I found out on my first demo don't try to talk and turn... almost cut the demo short by doing that.

Re: Face shield for demomeisters *LINK*

#4

Re: Face shield for demomeisters

Dale Cook

>Thanks from me to Ed, I also just ordered it.

Re: Face shield for demomeisters *LINK*

#5

Re: Face shield for demomeisters

C Sayer

>Thanks sold another one.

Re: Face shield for demomeisters *LINK*

#6

ANSI Compliant?

Wilford Bickel

>Does anyone know if this shield meets ANSI Z87.1? If not it is just a feel good item and does not meet the impact requirements for proper protection. I cannot find anywhere in the item description that it Meets ANSI Z87.1 - that usually means it does not meet proper impact standards and is not a proper safety faceshield. I had looked at this in one of their catalogs and could not find a reference to it meeting ANSI impact requirements.

Re: Face shield for demomeisters *LINK*

#7

Re: ANSI Compliant?

Ed Karch

>No it just usually means it hasent been tested.

Re: Face shield for demomeisters *LINK*

#8

These meet ANSI standards

Curly Smith

>

Note that you'll need the hard hat adapter plus the face shield (and a hard hat).

I find this version of their website to be easier to navigate Mesh Face Shield but YMMV.

Re: Face shield for demomeisters *LINK*

#9

Re: ANSI Compliant?

john lucas

>I just ordered one. I wear a faceshield only when I'm really nervous about a piece of wood. I know I should but I just find them extremely uncomfortable and 90% of what I turn is small anyway It sits right above my head collecting dust and then you have to clean it each time you try to use it. I might actually wear this one. OSHA approved or not it's got to be better than not wearing one.

Re: Face shield for demomeisters *LINK*

#10

Bill Blasic

Re: ANSI Compliant?

Bill Blasic

>I ordered one, no more fogging will make it worth while.

Re: Face shield for demomeisters *LINK*

#11

Are clear inserts available?

Jack Savona

>

Re: Face shield for demomeisters *LINK*

#12

Re: Face shield review

Stuart Johnson

>Have any of the others that ordered one of these face shields received theirs?

Mine came a day or so ago and I am not impressed. The shield is shorter that my normal mask. As a result there is a wide open area in the bottom. A slight amount of pressure on the bottom edge causes the whole mask to come up and off. I might be wrong but I don't think this shield offers much protection for anything other than shavings.

I will be interested in hearing the opinions of others.

Re: Face shield for demomeisters *LINK*

#13

Re:Mine arrived late last week. and .......

Jamie Donaldson

>... I was disappointed as well and would not have bought if I could have seen up close and personal beforehand. It has such a flimsy viewing screen, but I glued it in place with Plumbers Goop and now it works much better. I will use it during some of my demos which shower me with chips while trying to talk, and that was my intended need.

Re: Face shield for demomeisters *LINK*

#14

Stuart, I don't have this particular...

Allen Neighbors

>face shield, but what I did to mine might help yours.

I was always getting shavings in my coveralls because I didn't zip it up all the way to the collar, and they'd work their way down the neck of my t-shirt... and though it's a full face shield, it was still just short enough that I'd have shavings in my shorts before the day was done.

So I taped a 6" wide piece of canvas tarpaulin material along the bottom of my shield. It extends below my collar opening enough that it keeps the shavings out. Wonderful!

Re: Face shield for demomeisters *LINK*

#15

Re: Stuart, I don't have this particular...

Stuart Johnson

>Thanks for the tip Allen. It isn't so much that the mask is too short but that it is way to light weight to be of much use for anything other than light shavings.

Re: Face shield for demomeisters *LINK*

#16

A piece of junk!

WF Railey

>I am very disappointed in the quality of the "Wire Mesh Safety Guard".

THIS IS NOT FACE PROTECTION. And anyone using this item as safety equipment is at risk for serious injury.

Furthermore, GW is at risk selling this item as safety equipment.

Nice idea if the quality had been up to safety standards -- but it's not so don't put your face at risk.

Re: Face shield for demomeisters *LINK*

#17

Me too

Doug Thompson near Cleveland

>I was surprised the wire mesh was so flexible, what looked like a great idea was a let down. Live and learn... now we know. A face shield needs to take a hit but this won't.

Lets keep looking.

Re: Face shield for demomeisters *LINK*

#18

So, I Am Curious...

Barbara Gill, Remlik VA

>Will you guys return the item or keep it?

Re: Face shield for demomeisters *LINK*

#19

Re: A piece of junk! *LINK*

Chuck Engstrom

>Stihl sells a "Forestry Helmet System" combining hard hat, mesh face shield, and hearing protection. I think it runs about $45 and is really substantial. Wearing it for a demo might look like overkill but it would provide the desired protection without muffling your talk. Link below, there's also a page of testimonials with photos of misadventures......

Bet--

Chuck Engstrom


Stihl Forestry Helmet System

Re: Face shield for demomeisters *LINK*

#20

Re: So, I Am Curious...

Stuart Johnson

>I'll return it. If it came anywhere near to being safe I would keep it and chalk it up to a risk of doing sight unseen web ordering. As it is, I feel it is worse than not wearing anything because it might give a false sense of security.

Re: Face shield for demomeisters *LINK*

#21

Not really...

Peter Teubel

>I have that "system". While the screen may reduce penetration injury, it won't do much for blunt trauma. Again, too flexible.

Re: Face shield for demomeisters *LINK*

#22

Re: So, I Am Curious...

Doug Thompson near Cleveland

>I'll keep it but won't use it to rough a turning.

Re: Face shield for demomeisters *LINK*

#23

Re: So, I Am Curious...

Ed Karch

>Im with Doug. I also was disappointed in the cheapness of this rig.

Re: Face shield for demomeisters *LINK*

#24

Returned it for full refund

WF Railey

>

Re: Face shield for demomeisters *LINK*

#25

the problem with the screen only

WF Railey

>...is that you don't have crisp vison with the wire mess...

but if stihl would just cut a little osha-approved window in their screen, it would work perfectly!