Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Steady Rest - Pics

Posts

Steady Rest - Pics

#1

Steady Rest - Pics

Mike Rubes, Apex, NC

>Hi all,

I finally got around to making a Steady Rest for my Jet Mini. Many thanks to Dominic Greco for his picture tutorial of his in the article section. Mine is very closely based on his.

I used 3/4 inch plywood sandwiched together for the body. I couldn't find "cheap" inline skate wheels, so ended up buying a cheap pair of kids inline skates, just for the wheels. They were only $14, but after using it, I think it would have been better to go ahead and buy decent wheels and pay more. These are really hard and tend to leave a groove in the piece of wood. I might try to mount them themselves and turn them smoother :)

Here's the rest:


and here it is in action: (I swear that my shop is not normally quite so messy. I mean, it's never clean, but it is usually not that bad!)


The vase in that picture turned out pretty good. It ended up being a birthday gift for a friend at work.

The rest works really well, but I was a little surprised at how much noise the wheels make when spinning. Again, a nicer set of wheels might work better.

Thanks for taking a peek and many thanks to Dom for his article!

Mike

Steady as she goes in Apex, NC!

Re: Steady Rest - Pics

#2

JL

Re: Clean shop, clean body...

JL

>take your pick. Nice adaptation of a steady rest.

Re: Steady Rest - Pics

#3

Re: Steady Rest - Pics

Wally Dickerman in Arizona

>Mike, a couple of wraps of masking tape on the piece will do a good job of protecting the wood from being damaged by the wheels. I always do that when using a steady rest on a sanded surface. Blue tape won't leave a residue.

Wally

Re: Steady Rest - Pics

#4

Great Idea !

Ray Carson - Lawrenceville, NJ

>I love the inginuity of the people at WC. Clever idea. Looks well made too, nice and solid.

The noise is probably because the wheels weren't meant to turn at the speed your making. And, they are plastic encased bearings.....those are my guesses.

Just my 2 cents worth.

Ray

Re: Steady Rest - Pics

#5

Well done Mike!

Dominic Greco in Richboro PA

>Mike,

Lookin' good my friend! You did a very nice job adapting the plans for use on your Jet Mini. I'm glad my article was of some assistance.

Did you cut the dados in the back of the circular portion of the rest? These are the ones that the "arms" ride in. They are somewhat important. They help to stop the arms from being twisted out of position as they bear against the spinning work piece.

If you haven't cut them yet, don't be too put out. You have all the hard work done already. So cutting those dados will be a piece of cake. Five minutes with a hand saw to define the sides and another 5 with a router to make the dado and "Bob's your Uncle". :>)

As far as the noise goes, that may be because of the bearings used in the wheels. They might not be up to taking that kind of RPM or load. But no worries. You can always replace them at a later date. Just keep your eyes opened for close outs. I bought my wheels at Kmart when they were getting rid of one brand scooter.

See ya around,

Dominic

Re: Steady Rest - Pics

#6

No Offense ! ->

Greg Deavers

>Looks very similar to mine!

Re: Steady Rest - Pics

#7

I don't have it any more.

henthorn

>Sold it at my estate sale, Sob. However the best steady rest I made used ball bearings for the roller wheels and then I used painters tape to keep the bearings from marking the work. The bearings were silent and they worked very well.

Re: Steady Rest - Pics

#8

Thanks!

Mike Rubes, Apex, NC

>Hi all,

Thanks for the notes. Wally, thanks a lot for the tape information, I will give that a go. Dom, I did not cut the dados, but that's a great idea! That would definitely make it more stable. Your pics really were a GREAT help getting mine together. Frankly, the best idea on your page was the tightening nut on *both* sides of the rest. That really helped.

Thanks again, everyone.

Mike

Soon to be shop cleaning day in Apex, NC

Re: Steady Rest - Pics

#9

Re:Skateboard shops have a VAST....

Jamie Donaldson

>..selection of HS wheels to fit any use and budget. I wish I had all the upgrade parts my rental son tossed when he was going thru his skateboard phase of life, but now he's grown into cars.

Re: Steady Rest - Pics

#10

A son for rent?

david Chung

>The menehunes want to know about this or was it a typo?

Re: Steady Rest - Pics

#11

What can he do they outlawed purchasing

Stuart Johnson

>

Re: Steady Rest - Pics

#12

Re: David- for 33 yrs. my wife and I .....

Jamie Donaldson

>....traveled most of 9 mos. out of the year with my photo business, and we decided the best way to have kids and pets was to rent them. Her younger sister lives 3 houses up the street, and niece and nephew were among our first rental kids, but they are now 28 and 20 yrs. old. The next door neighbor provided 2 more rentals, both now married, and many of the kids from our business days were and are still part of our extended rental family.

Re: Steady Rest - Pics

#13

Thanks, Jamie, that clears it up for me.

david Chung

>The Hawaiians have a term for a similar family arrangement. They called it HANAI, a word often used like a verb: like a child hanai(ed) over to a relative and physically living away from their natural parents but not formally adopted.

Re: Steady Rest - Pics

#14

Re: Steady Rest - Pics

Tom Vensel

>That sure is a nice looking steady rest . What is the outside diameter ? Thanks ,Tom

Re: Steady Rest - Pics

#15

Re: Steady Rest - Pics

Mike Rubes, Apex, NC

>Hi Tom,

Thanks for the compliment. The outside diameter is 10 inches. The inside diamter is just under 9 inches.

Thanks!

Mike