Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Spiral Work

Posts

Spiral Work

#1

Spiral Work

John Morovich

>Needed to sharpen my spiral work... there was a bunch of incompleted spirals that made a fancy pile of firewood. The two matching candlesticks are cherry with a triple open bine. The other is a figured maple four start open twist with a barly twist made from walnut interior to the four twist. Project was fun and it helped me refine my process for open twist work. Appreciate any helpful suggestions and comments. Also the bases are weighted, I hallow out a portion of the base and layered in some steel shot and epoxy.


img

Re: Spiral Work

#2

Re: Spiral Work

Cyril Griesbach

>Very nice, John. I'd say your spiral work is plenty sharp.

Re: Spiral Work

#3

Re: Spiral Work

Charles Yawn

>John, those look nice. What kind of tool do you use to cut the spirals? I started two of these a long time ago, and was using bowl and spindle gouges to cut the spirals on the lathe with the lathe off. It was so slow and laborious, I set them aside until recently. I bought a hand held power carver (Proxxon SGM) and am hoping this tool will speed things up a bit. Charles

Re: Spiral Work

#4

Re: Spiral Work

John Morovich

>On the maple candle stick I used a twist gouge made by Hamlet and with a set of microflex rasp and files I got a good twist. It's slow going mostly because my skills at using a gouge and hand - eye coordination..... For the cherry sticks I used an Arbortech blade on a grinder to start my cuts and use rasps and microflex shapers and a lot of sandpaper but pretty quick work.

Re: Spiral Work

#5

Re: Spiral Work

tm

>very nicely done

Re: Spiral Work

#6

Re: Spiral Work.......absolutely horrendous.

Ray Carson - Lawrenceville, NJ

>Hello John,

I can't believe you made us look at these. I mean look at the finish, all glossy and perfect. And the spiral work, way too even. Looks like a professional did it. How dare you? You think you can come in here and flash your work around like Norm. Please!

Okay....seriously.....WOW !!!!

Stunning, beautiful, excellent finish. .....I am way jealous...... I still don't understand how a spiral is formed. Someday I guess I will learn.

Nice work John..........A+ :-)

Ray