Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Platter Practice #4

Posts

Platter Practice #4

#1

Platter Practice #4

Chris DiCiaccio

>This is a piece of Hard Maple 8 1/2" x 1".


img

Re: Platter Practice #4

#2

Re: Platter Practice #4 

Chris DiCiaccio

>


img

Re: Platter Practice #4

#3

Re: Platter Practice #4

Mike Rubes, Apex, NC

>Hi Chris,

Nice platter. I love the detail work on the bottom! I assume that it is carved?

Nice grain in that one and it looks like a wonderful finish.

Thanks for the pics,

Mike

Spent the whole day in the shop today in Apex, NC!!!

Re: Platter Practice #4

#4

Re: Platter Practice #4

Allen Neighbors

>Really nice job on the platter. I especially like the surprise on the bottom. Nice touch.

Chris, I turn a lot of the bottoms of my bowls like this... sorta... when I'm using my SN2 with regular jaws, I'll make a tenon in a recess, if the bowl or platter is large enough to need a larger foot.

Then I remove the tenon and finish the bottom recess, leaving the rim for the foot.

Was the designed area on the bottom of this platter a tenon in it's previous life? :)

Re: Platter Practice #4

#5

Re: Platter Practice #4

Chris DiCiaccio

>Allen, Yes, it was originally a tenon.Because my jumbo jaws aren't large enough to hold this platter I had to find another way to take off the tenon. I chose to try my dremel tool with a round headed bit using it's flex shaft. Just started at the center and tried to rout "wiggly" spokes outward, leaving the rough design you see. It worked fine and the platter sits level.