Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

home built lathe

Posts

home built lathe

#1

home built lathe

Darylee

>I know I posted something last month, but can't find the thread. I've been very ill this month.

I've been toying with the idea of making a bowspring lathe.

I have 0 experience on lathes and don't want to spend...don't have it anyway...on buying a new modern lathe..

I do currently do small jobs like bottle tops and tool handles on the drill press. I made a tool rest from wood that clamps to the base plate.

What do you all think of the cheap lathes available at places like harbor freight?

What do I need to consider if I make my own bench lathe out of an old motor?

Where could I get parts for such a beast or would it be better to get the cheap lathe?

Re: home built lathe

#2

JL

Re: home built lathe

JL

>I personally don't like cheap lathes (i.e. HF). I've seen springpole lathes and treadle lathes built and used and even tried using a couple. They work fine - if your legs are up to it :). I was told that you can build one for ~$100 or less.

As far as building a lathe and using a motor?

Consider the parts of a lathe:

Headstock with motor (belts, drive spindle, etc.)

Ways

Tailstock w/ lock and live center

Tool rest.

If you want to build one, go for it - but it might turn out to be more expensive than you think.

How about a used lathe or a mini lathe? Some of the inexpensive mini lathes are under $300 (i.e. Rikon).

Re: home built lathe

#3

Re: home built lathe

John K Jordan

>You could certainly build a small lathe from scratch and many have done so. However, I would consider such a project as more of a hobby done for the fun of it rather than to save money or have a better lathe. The headstock part would be easiest, especially if you have access to metal working tools or can salvage the spindle with a morse taper from an old lathe, but if you want to turn things between centers, getting building the tailstock mechanism and making the ways to keep precision and allow quick sliding and locking seems more challenging to me.

I've occasionally seen small used lathes for sale at low prices. I even gave one away a few years ago when I moved to a larger lathe. Even an inexpensive lathe will come with all the parts you need to start turning right away.

JKJ

Re: home built lathe

#4

Re: home built lathe

Bill Hale / The Wood Spinner

>Put an add in the paper for a used lathe. If you get a call do a quick inspection and check here for correct price.

Good turning and be safe

Bill in CG, AZ.

Re: home built lathe

#5

Re: home built lathe

Barry Irby

>I would look on Craigslist for about a hundred miles around you. Maybe see if there is a Free Cycle list near you.

Also, find a local turning club and attend the meetings. Ask if anyone has a used lathe they would let you have reasonably. I gave one away.

Re: home built lathe

#6

Re: home built lathe

Jake Niedling

>I just picked up a used Delta Midi lathe for $100. It has everything to start turning. Its very well made. I would look for a used one first. It will be your best value, I think. But of course if you like to make things, then go for it.

Re: home built lathe

#7

Re: home built lathe

Sonja Lemon Sacramento Ca.

>Darylee,

After checking your site, I think you might get some good information from the Foxfire 2 book, page 164. They show how to make a foot powered lathe. If you can't find the Foxfire book, let me know. Are you planning on using this with your living history demos??

Sonja

Re: home built lathe

#8

Re: home built lathe

John Peck

>You might want to review Chapter 4, "Lathes", of Roy Underhill's book "The Woodwright's Workbook" (1986), where he discusses both bow-spring lathes and treadle lathes and shows how he built a treadle lathe.

Re: home built lathe

#9

Re: home built lathe

jim Miles - Charlotte NC

>Darylee:

I have been turning about 30 years and never owned a "store bought"

lathe. I have built 3 -4 lathes and have improved them through several re-incarnations. I would agree with several of the comments that if you can find an inexpensive used small lathe you are probably best off doing this. With that said if you really want to build your own( some of us are just too damn independent and want to do our own thing) Fine Wood Working Mag # 57 March 86 has a couple of designs for shop made lathes. FFW also at one point had a booklet I think called Making & Modifying Machinery that had several designs also. I attached some photos of one of my lathes that I now use mostly for bottle stoppers.


img

Re: home built lathe

#10

Re: home built lathe

jim Miles - Charlotte NC

>Headstock shaft with pillow block bearings also shows back of tool rest


img

Re: home built lathe

#11

Re: home built lathe

jim Miles - Charlotte NC

>Tailstock:

Old C-clamp, homemage wheel to turn, small bearing for "live center"


img

Re: home built lathe

#12

Re: home built lathe

jim Miles - Charlotte NC

>Power train Old furnace motor, 3 pulley on end of shaft for speed change.


img

Re: home built lathe

#13

Re: home built lathe-addition

Darylee

>I need to be able to turn chair backs and such as well....36" or so.

Re: home built lathe

#14

Re: home built lathe

Darylee

>Good thought.. I do some blacksmithing now and know a couple of my friends who used to work bowls and such...I think their lathes were rather small though.

Re: home built lathe

#15

Re: home built lathe

Darylee

>He he. I forgot that was linked in.

No, there's too much to carry as it is... LOL

I go for the shooting and deliver pieces already ordered.

When I do demos, it's basic hand tool carpentry or leather work.

I just made a new shaving horse that breaks down for this. My old one is now retired. (previous thread) I do stick chairs, trestle stills. Handplanes, chisels, spokeshaves, and scrapers. I really get a crowd using the scrapers.

It's amazing how people will stand there for an hour watching you finish rabbiting a small box, then dowling it together.Then they scratch their heads trying to figure out how you are going to get into the box....I'm mean. But they sure remember it and stick around to see me inset the hand forged hinges and half mortise locks.

I degress;

I prefer non powered tools and is why the idea of a self powered one appeals to me.

If homebuilt; I have metal and mechanical skills if given a pattern can make the heads and such. I have a friend with a lathe and could go from there..or use the parts from an old none.

Re: home built lathe

#16

Re: home built lathe

Darylee

>Thank you so much for the photos.

I'd not thought of the c-clamp..that solves that end's problem.

I also have two blowers from furnaces.

One is in my home built air filter for the shop.

I also have an old 1/2 in drill that I could scab the chuck off of.

I'll need the pullies and bearing for the live end.

You all got me started...Thanks.

Re: home built lathe

#17

Re: home built lathe *LINK*

john lucas

>As someone who frequently demonstrates on spring pole lathes I am going to recommend a treadle lathe. The turning just goes so much faster and it's much easier on your body. There are lots of references on homebuilt lathes on the web. Already mentioned are the foxfire books and Roy Underhill.

If you're really excited about it take a workshop from Don Weber. He teaches classes in building shaving horses, lathes, and tools. He's a great guy.

I've built several spring pole lathes. They are the easiest because they don't require any bearings or anything. The treadle or motor driven lathes work better with bearings.


http://www.handcraftwoodworks.com/

Re: home built lathe

#18

treadle lathes on the web

John K Jordan

>There is more, but here are some:

http://www.inthewoodshop.org/methods/trlathe.shtml

http://homepage.mac.com/estuary1/estuary/PhotoAlbum4.html

http://pages.friendlycity.net/~krucker/BoysLathe/index.htm

Re: home built lathe

#19

Re: home built lathe

Darylee

>Same was suggested by a woodworking friend....not quite traditional, but I do have a base from an old sewing machine....

not th ebest possibility, but one.

I will be making a bench top lathe....I have most of the parts, and can get the live bearing cheaply.

My neighbor gave me an old lathe he had and was glad to get rid of it. ...I'll be using the parts off of it and a different motor.

Thanks all.