Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

New Woodturner!!!!!!

Posts

New Woodturner!!!!!!

#1

New Woodturner!!!!!!

JK

>Hello I am a new wood turner, I have been looking around for some ideas on what to make on my lathe, If anyones knows were I may find some good beginner projects feal free to answere.

Thanks!

Re: New Woodturner!!!!!!

#2

Re: New Woodturner!!!!!!

Ed Larson

>JK, go to Darrel Feltmate's web site Around the Woods. Just google Around the Woods. Lots of project's and tips for begineers. Welcome to the woodturning club.

Ed

Re: New Woodturner!!!!!!

#3

JL

Re: New Woodturner!!!!!!

JL

>Search up a few projects. I'm sure you'll find plenty.

Most of the books have a few projects in them.

Keith Rowley's "Woodturning: A Foundation Course" has some nice projects. So do all of Raffan's books.

Re: New Woodturner!!!!!!

#4

Bill Blasic

Re: New Woodturner!!!!!!

Bill Blasic

>Find a woodturning club in your area even if it means driving a few hours every month or so.

Re: New Woodturner!!!!!!

#5

Re: New Woodturner!!!!!!

Bill Neddow

>here is another source of inspiration:

http://www.woodturningonline.com/Turning/Turning_projects.html

Re: New Woodturner!!!!!!

#6

Re: New Woodturner!!!!!!

Greg Haugen

>Welcome to the addiction. If you're more on the "visual" side of learning I'd recommend going somewhere that sells Jet tools. Jet has a Seris that I think is called "Shop Series" DVDs and Videos. The "Lathe" DVD/Video is done by Nick Cook, a very accomplished turner. It goes through lathe safety, etc. as well as some "skill building" projects. For the $8.00 (aprox) it's a great value.

I'd also recommend becoming a member of the AAW, American Association of Woodturners. www.woodturner.org. The magazine they put out is worth the dues alone. They also have some good project videos. I'd recommend the Bob Rosand or Mark St. Leger videos.

Any other questions just ask. Again welcome.

Greg

Re: New Woodturner!!!!!!

#7

Re: New Woodturner!!!!!! *LINK*

Gordon Seto

>I think Jet may have put the Nick Cook series on YouTube for free. They are some of the best.

Watch out for what you see in YouTube. There are a lot of good videos. But there are a few should be in the "What NOT to do" series without labeling so.

Gordon


Nick Cook on YouTube

Re: New Woodturner!!!!!!

#8

Fast, fun, project.

Allen Neighbors

>JK, Welcome to the vortex that just keeps you spinning! :)

A fast and fun project is a biscuit cutter. Three inch diameter piece of dry wood, four inches long.

Turn a tenon for your chuck on one end. Mount in your chuck.

Hollow the tailstock end to a depth of 1", for the biscuit cavity, with 3/32" thick walls. About 3/4" depth, curve the walls in, (about 1/4" radius) to a flat bottom. Curve the outside to match the inside, to a stem diameter of 1 inch. Make the stem about 1" long, and turn a palm-shaped knob about 2 1/4" dia about 1" thick on the other end... (but don't part it off 'til you've sanded it smooth, and drilled the air holes.) Make the stem a curved stem - it looks good.

Drill 3/16" air holes on opposite sides of the stem, (from inside the cavity outward... this lets the biscuit dough escape from the cutter).

Sand it smooth, part it off, and finish sanding the palm knob. Done.

Fast, easy, fun... and LOYL and all her friends will want one. (I don't know why (no one makes biscuits anymore), but they do. :)