Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Spalted Wood for Food Contact

Posts

Spalted Wood for Food Contact

#1

Spalted Wood for Food Contact

Ed in Sptbg.

>I think this was covered in a fairly recent thread, but I haven't found it in a search. Should spalted or ambrosia maple be used for food contact (salad bowls)? How about sycamore with blue or gray areas? Thanks in advance for any replies.

Re: Spalted Wood for Food Contact

#2

Steven Antonucci

Sure.

steve antonucci

>I don't like spalted maple for a salad bowl (personally), but there's nothing wrong with it.

As far as ambrosia, make sure you epoxy the holes or you'll find dressing on your table after dinner.

S

Re: Spalted Wood for Food Contact

#3

Re: Spalted Wood for Food Contact

Greg Haugen

>I personally would not use anything Spalted for a food-use bowl. Now I'm classifying food use as direct contact with food and washed after use. A table center-piece fruit bowl-sure why not. My concern is any of the spalting leaching out in the food oils or moisture. There's alot of allergies that are effected by molds. If it were me, I'd play it safe. Ambrosia Maple? hhhhmmmmm. When in doubt don't use it. For bowls that will be used, abused, washed, etc. I like a good solid healthy stock with some nice grain. There's enough other things to make with spalted, ambrosia, and yellow with purple polka dots :-)) wood. Items made for food use are critiqued very much. Any little things is picked out to put it down. Just look at the wars over food finishes. One of the "good ole" finishes, mineral oil, is often used. It's very humbling to say the least when someone at a show or gallery shouts out, "What-why do you put that on your bowls? My mom used to give me it for a laxative." Oh Yeah, pack up and head home, sales are over. IF there's a question about it, don't use it.

just my 2 cents.

Greg

Re: Spalted Wood for Food Contact

#4

Re: Spalted Wood for Food Contact

E.T.

>Mineral oil on wood turnings looks awfull. It also gets all over customers hands because it doesn't "dry" and the turner cannot wipe all the excess off. I once visited a woodturners "gallery" and after handling several bowls and plates my hands felt greasy and dirty. I realized what was the problem after reading the guys promotional literature, mineral oil, yuk!!! It doesn't even provide a suitable wearable surface to the turning. There are many better finishes to apply that are food friendly. Get the latest AAW Journal and read the article on finishes. ET