Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Help needed, giving demo on decorated turning

Posts

Help needed, giving demo on decorated turning

#1

Peter Charles Fagg (UK)

Help needed, giving demo on decorated turning

Peter Charles Fagg (UK)

>Friends, I have volunteered to give a talk to my local turning group (The Tudor Rose Woodturners) about decorating turned wood and I had intended to show some images from around the world of the methods that can be applied.

I would really like to show some images of different techniques i.e. sandblasting, burning (both pyrography and fire in general), paints inks etc.

Would other members be willing to allow me to use images of their work and point me in the right direction to galleries etc. that have images suitable to downloading?

Full credit would be given to the turners, I am no fly by night!

I have tried searching the net but glass appears to be the favourite medium!

Regards, Peter.

Re: Help needed, giving demo on decorated turning

#2

Re: Help needed, giving demo on decorated turning *LINK*

Mike Cunningham (Cape May NJ)

>A friend of mind, Dennis Fuge does a lot of surface decorating, eggshells, copper inlay, pewter inlay, stone, dyeing, etc., and demos of same in the NE U.S. He's very helpful and while he doesn't post on message boards I'm sure he would respond to an email request. See the link, email and tell him that I suggested you contact him.

Mike


Time For You

Re: Help needed, giving demo on decorated turning

#3

ps *LINK*

Mike Cunningham (Cape May NJ)

>Try Al Stirt as well


Al Stirt

Re: Help needed, giving demo on decorated turning

#4

Re: ps *LINK*

bowlman

>I do a bit of decorating

http://www.dickgerard.com

also see my galery on AAW's site and on WOW

You have my permission to show anything you want ... hell, I relish the exposure!!!


http://www.dickgerard.com

Re: Help needed, giving demo on decorated turning

#5

Dick Hines

Re: Help needed, giving demo on decorated turning

Dick Hines

>Does Molly Winton have a web site? She does some great burnings.

Re: Help needed, giving demo on decorated turning

#6

Re: Help needed, giving demo on decorated turning

Molly Winton

>Aren't you just a sweetie! I do have a website. Peter, feel free to use any you see if you'd like. If they're not large enough files, email me, and I'll send you some larger images.

Re: Help needed, giving demo on decorated turning

#7

Oh for pity sake....

Molly Winton

>I've tried two times to add the link to my site, and it doesn't show up. I'll write it here: www.turningmaven.com

Re: Help needed, giving demo on decorated turning

#8

Peter Charles Fagg (UK)

Re: Help needed, giving demo on decorated turning

Peter Charles Fagg (UK)

>Mike, thankyou for the link I shall follow it up and hopefully have a few more images for the talk.

Regards, Peter.

Re: Help needed, giving demo on decorated turning

#9

Peter Charles Fagg (UK)

Re: ps

Peter Charles Fagg (UK)

>Dick, thankyou for your response, hopefully there are some of your images I can use.

Thanks again, Peter.

Re: Help needed, giving demo on decorated turning

#10

Peter Charles Fagg (UK)

Re: Oh for pity sake....

Peter Charles Fagg (UK)

>Molly, please accept my thanks for your link and offer.

I have emailed you and also downloaded several images to use.

Regards, Peter.