Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Micro mini goblet

Posts

Micro mini goblet

#1

Micro mini goblet

john lucas

>This is the last in the mini series. The big ebony goblet is 7/16" and about doll house scale. The micro mini next to it is .024" tall or about as tall as 6 sheets of paper.


img

Re: Micro mini goblet

#2

Re: Micro mini goblet

john lucas

>Here it is on a Dime with a pin head next to it.


img

Re: Micro mini goblet

#3

Re: Micro mini goblet

Ron in Drums PA

>Did you use the 80 grit gouge on this one?

Kidding aside, you should contact "The Guinness World Book Of Records" for the smallest turnings completed on a full sized lathe.

Re: Micro mini goblet

#4

John, are you going to add...

Cyril Griesbach

>this one to your little square magnifing box with the others?

Re: Micro mini goblet

#5

Steven Antonucci

How do you sign them?

steve antonucci

>

Re: Micro mini goblet

#6

WHAT?

richard jones

>No loose ring? :)

Very nice, I could never see something so small to turn it. Do you use any magnification headgear?

rich

Re: Micro mini goblet

#7

Mike Hunter

Re: Micro mini goblet

mike hunter

>John ... I like that ring. I am impressed!!

Re: Micro mini goblet

#8

Re: Micro mini goblet

john lucas

>I plan to contact them. It looks like a lot of paper work but might be fun.

Re: Micro mini goblet

#9

Re: John, are you going to add...

john lucas

>It is going in micro goblet box. I also have a small goblet box. I love to watch people looking in and seeing the yellow heart goblets which are much bigger. Then all of the sudden they will see the little one. That expression is worth doing it.

Re: Micro mini goblet

#10

very carefully :)

john lucas

>

Re: Micro mini goblet

#11

Re: WHAT?

john lucas

>I use a stereo microscope I got off Ebay for $35. I had to use the microscope to grind and sharpen the tools as well. It took quite a bit of jury rigging to make a stand and have micrometer adjustments to get the scope in the right position above the goblets.

Re: Micro mini goblet

#12

Re: Micro mini goblet

john lucas

>Mike I pulled out a curved scribe that I had and it looked really sharp. I put it under the scope to cut the ring and it was huge. I had to touch it up with an ultrafine diamond hone and then green compound on leather strop to get it sharp enough to undercut the ring.

The inside of the goblet isn't very clean. I needed a super small Hunter tool. :)

Re: Micro mini goblet

#13

Re: Micro mini goblet

John Kyler

>Do you use tung oil (like Julio Marcolongo)?

Ok, so I take it you drink less with that little one? Or you do more curls?

Nice, but a PM for that small. I have the PM4224 if size matters I might be able to go smaller... NOT

John

Re: Micro mini goblet

#14

Re: Micro mini goblet

Jim Terry

>John, That is amazing! If I were ever lucky enough to do something like that I would probably drop it in the shavings under the lathe when I parted it off.

Re: Micro mini goblet

#15

Don't sneeze around it!

Steven Kubien

>

Re: Micro mini goblet

#16

Re: Micro mini goblet

John Kyler

>Just to think.....

Many of us when we have a catch (well I never dooooooo :)

But they are bigger than the whole project John makes!!!

Again nice work.

Re: Micro mini goblet

#17

When I get a catch you can't see it. :)

john lucas

>