Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

new LARGE bowl

Posts

new LARGE bowl

#1

new LARGE bowl

chris rolke

>it is made from 5 10' 2x4 cut and laminated together

making a 30" square that weighed 53 lbs

when i cut the corners off i dropped it down to 42 lbs and that is what went on my jet 1642

final weight is 13 lbs diameter is 28 1/4"


img

Re: new LARGE bowl

#2

2nd pic 

chris rolke

>


img

Re: new LARGE bowl

#3

3rd pic 

chris rolke

>


img

Re: new LARGE bowl

#4

4th pic 

chris rolke

>


img

Re: new LARGE bowl

#5

Re: new LARGE bowl

George Van

>What a great job handling that larrge of piece Chri. I think the best photo is the one with the smile!

Re: new LARGE bowl

#6

Steven Antonucci

A lot of work for a sled :-)

steve antonucci

>Don't you have a Walmart close by?

Pretty cool what you can do with an outboard setup. Looks like you might do another one, huh? Start with a 2x10 so you get some depth?

Steven

P.S. Did you run them over a jointer before glue up?

Re: new LARGE bowl

#7

Re: new LARGE bowl

Bill Hale / The Wood Spinner

>Great job Chris. Did you jointer the edges and what type of glue did you use ?

Good turning and be safe

Bill in CG, AZ

Re: new LARGE bowl

#8

Re: A lot of work for a sled :-)

chris rolke

>yea its a lot work for a sled

no i did not join or plane them prior

i dont knwo about another one

max rpm was about 325

Re: new LARGE bowl

#9

Re: new LARGE bowl

chris rolke

>no joining just careful selection from homedepot

and regualr titebond glue

Re: new LARGE bowl

#10

Re: new LARGE bowl

Norm Smith

>Chris , Both the turning and cute little guy look great. Do you find that outboard tool rest stable enough??

Norm

Re: new LARGE bowl

#11

Re: new LARGE bowl

chris rolke

>the outboard rest does work pretty good