Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Power Switch for My Jet Mini

Posts

Power Switch for My Jet Mini

#1

Power Switch for My Jet Mini

Jim Shaver Oakville, Ontario

>Hi,

I had an unfortunate accident with my Jet Mini and crushed the on/off switch. It is totally non functional. Has any one here replaced one before? Where did you get your replacement please?

I would appreciate a source as Jet is not sold in Canada, nor will they ship parts to Canada (they have a no trade agreement here with another company, long story).

I called Jet yesterday and got "Bob", I am not sure he understood my questions.

Thank You,

Jim

Re: Power Switch for My Jet Mini

#2

Re: Power Switch for My Jet Mini

Carol - now in NC Nebraska

>Grizzly has one that looks similar. G8989. $4 USD. Maybe the Canadian equivalent company has one as well.

Re: Power Switch for My Jet Mini

#3

Re: Power Switch for My Jet Mini

John K Jordan

>I haven't messed with the Mini switch, but the one on the 1642 is easy to remove. (Not so easy to repair, but that's another story)

If you can't communicate what you need with Jet, let me know and I'll be glad to ask the guy here who does the local Jet/Powermatic service (and is a beekeeper and farmer and a really nice guy!) He should be able to get what you want or at least tell us exactly what you need to order. If necessary, I could get it and ship it to you.

You might also try taking it out and carrying it somewhere local and see if they have a match. I had a problem with a drill press switch and found a replacement at a local electric motor/equipment service company.

JKJ

Re: Power Switch for My Jet Mini

#4

Re: Power Switch for My Jet Mini

Rick Allen

>This is a simple SPST switch designed for 120 volts and 10 amps. Any SPST switch that can handle that voltage or greater and that much current or greater will work fine.

When the switch on my Jet mini broke I went to Radio Shack and bought a simple toggle switch.

  • I attached a small piece of aluminum over the switch hole by screwing the aluminum piece to the lathe.
  • Drilled a suitable sized hole in the aluminum for the togle switch.
  • Removed the piece of aluminum from the lathe
  • mounted the new switch and connected the wires
  • reattached the mounted and connected switch onto the lathe.

That was 5+ years ago. The lathe and switch are working fine.

Good luck with your repairs.

Re: Power Switch for My Jet Mini

#5

Re: Power Switch for My Jet Mini

Kirk (KC) Constable

>Buy two while you're at it. I have two JET minis and have replaced the switch on both of them. Maybe I'm just hard on switches... :-)

KC