Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

OT: A night without turning...

Posts

OT: A night without turning...

#1

Steven Antonucci

OT: A night without turning...

steve antonucci

>Last night, I had high hopes that I'd get a clear sky after the day we had. I went out, and to my dismay the moon was in a hazy sky. After looking at it off and on for a few minutes, I decided to drag out the telescope. Messing around with the digital, this is the best shot I took in a dozen and a half over 15 minutes.

Not full, and still some technical challenges, but I hope to have it figured out by the full moon.

Steven


img

Re: OT: A night without turning...

#2

Steven Antonucci

OT: An hour later

steve antonucci

>I hear the cans rattling, and I guessed it was a bear. I was right. Biggest bear I've seen in the driveway here in NW NJ. At least 300#- the picture doesn't capture the full size of this one.

BTW- A nasty fact- bears like diapers... eww...

Steven


img

Re: OT: A night without turning...

#3

Re: OT: A night without turning...

Bill Hale / The Wood Spinner

>Steve

I am getting back into photography after about 10 years of turning only. I have a Rebel XTi with a couple of lenses and having a great time. I love new challenges. What did you use for F stop, ISO and time on this shot? I also have a Celestron C90 1000mm f11 telescope. The camera mount I have will not fit the new caner so I need to buy a new one. Where would you suggest to get one ?

Thanks for any help from anyone.

Bill

Re: OT: A night without turning...

#4

Steven Antonucci

The beauty of digital...

steve antonucci

>Is the instantaneous feedback you get!

I shot this on Shutter priority somewhere around 1/60-1/80. I believe that the camera was set at 100 ISO, and the F-stop might have been 5.6 (chosen by the meter in Shutter priority).

As far as the telescope goes, my Orion 8" dob is 1200mm with a 25mm eyepiece. I shot it handheld with the camera up to the eyepiece. I was bracketing up and down a stop to see if it helped. The moon is so bright, it helps to underexpose it a bit or you lose details.

I may try to cobble together a mount or just buy one to see what effect it had vs. hand held. If I raise the ISO to 400, I'd probably shoot it at 1/200 or so. You can see the results instantaneously, and adjust up or down if necessary.

Right now, the biggest issue I have is that the eyepiece is 1.25" and the camera lense is much bigger. Aligning the lense to shoot through that tiny bit of glass is a bit of a balloon squeeze. Essentially, you need to have the center of the lenses aligned and on the same axis or it gets soft on the edges.

Hope that helps.

Steven

Re: OT: A night without turning...

#5

exposure data

John K Jordan

>FYI: Digital cameras embed exposure and camera data right in the JPG file. You can read it with an EXIF reader or from a properties dialog in many software packages. (I generally use ACDSee.) Be aware that some EXIF readers interpret the data more usefully than others. Most image editing software these days will copy the data to the edited file.

The moon image contains the data attached below. (is the camera clock set correctly?)

JKJ


img

Re: OT: A night without turning...

#6

Steven Antonucci

Knew that (sort of)

steve antonucci

>I knew it was somewhere, but I didn't really take the time to look for it. It's funny that you can get so much by downloading the image, and it's not even the original (shrunk for WC)

I shot most of the stuff at 1/60th. I was bracketing like mad and playing with the exposure, so I knew withing a range of a stop or so where the image should have been. I used to pay attention to all of that when I shot with my Hasselblad, simply because I had to. Digital makes a photographer lazy, since the camera records and feedsback way more than film. Failures are instantaneous, and corrected almost as quickly.

And no, the time is not set right...

Steven

Re: OT: A night without turning...

#7

Re: exposure data

Bill Hale / The Wood Spinner

>Thank you both.

Steve I had a camera mount for my old film camera and am going to buy one for this one. It should be great for wildlife, 1600 mm.

Bill

Re: OT: A night without turning...

#8

Brad Vietje

Jorge Castaneda~Downeast Maine

>Is very knowledgeable, hope he chimes in.

Re: OT: A night without turning...

#9

inconsistencies

John K Jordan

>>...It's funny that you can get so much by downloading the image,

>and it's not even the original (shrunk for WC)

It all depends on the software you use to resize or edit the photo, and whether or not you saved the file in some other format in any intermediate editing stages. For example, many programs today will keep the EXIF data regardless of how many times you edit as long as you save the file in a format that can hold the data. For example, the TIF format has fields for the data but the TGA format does not. To make it worse, some software does not know how to find the EXIF data in certain formats even if it exists. For example, Photoshop can recover data from PSD files but ACDSee cannot. Most programs these days handle JPGs consistently.

However, some editing software will not even save the data so you can't rely on it being there.

JKJ