Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

new micro goblet

Posts

new micro goblet

#1

new micro goblet

john lucas

>Off and on all weekend I worked on a smaller goblet than the last one I photographed. I will post a photo as soon as I figure out how to shoot something that small. It's about twice the size of the period at the end of this sentence I think. Maybe 4 times but not much larger. It's so small I don't even have a way to measure it yet. I'm going to check with the guys on campus who do specimen photography to see if they can photograph it with some sort of scale to get an accurate measurement. Now that I've done it I don't have to that anymore. I can concentrate on larger stuff.

Re: new micro goblet

#2

Re: new micro goblet

Barry Turner

>There's always an electron microscope.........

Re: new micro goblet

#3

Re: new micro goblet

John K Jordan

>Seriously, I can possibly get a photo of it with a scanning electron microscope. If you are interested, I'll make an inquiry.

JKJ

Re: new micro goblet

#4

Re: new micro goblet

john lucas

>John I talked to our SCM person this morning and he thinks that when the vacuum is realeased at the end of the session it will blow the goblet off.

I have 2 other options and hope to hear from them this afternoon.

This is one of the small goblets but is about 4 to 8 times larger than the smallest. I haven't had the guts to try and photograph the really tiny one yet. I want to find someone who can accurately measure it first. I don't want to take a chance of losing it.

That's a penny and a standard pin next to it.


img

Re: new micro goblet

#5

Steven Antonucci

How long do they take?

steve antonucci

>I'm guessing that 95% of the time is setup, 2% is turning and another 95% is finding it when you part it off...

Steve

Re: new micro goblet

#6

That one is tiny enough for me...

Brian Hahn in SW Wisconsin

>I'd never find if I put it down in my shop. The wood chips would hide it.

Re: new micro goblet

#7

What size is your parting tool? and...

keith zimmerman, Normal, IL

>how do you ensure you catch it after parting off, and how do you finish the bottom?

Re: new micro goblet

#8

Re: What size is your parting tool? and...

john lucas

>Set up is a serious part of it. I use a stereo microscope and positioning it is a hassle. heck just finding the goblet in the microscope is a hassle.

The one good thing about this is if you lose it cutting it off you don't even try to find it.

I use the toe of the skew to undercut the bottom so i don't have to finish it and it will sit upright. I built a paper box that I mount to my special mini tool rest. I hold it below the tool rest with a magnet. When cutting them off they simply fall into the paper box. Getting them out of the box and into the storage container is where I lose them. I didn't have my good tweezers and the cheap ones really are hard to hold something that small.

Re: new micro goblet

#9

Re: new micro goblet

Mark Williamson

>I am curious, what is the wood that you are useing for them? I turn mini's am always trying to see just how small I can get it and then how much detail can I get into it. I have found that ebony works really good for the really little ones but it is so dark, it is hard to show any detail. I like the lighter colors. I have had quite a bit of luck with turning really small pieces from soapstone. But it sounds like you are getting them REALLY small if you cant even measure it! I can't wait to see a picture of the one you are describing! How are you finishing them or are you. I can see to some degree that it would be a bit pointless to go through the motions of putting a finish on.

Re: new micro goblet

#10

Re: new micro goblet

John K Jordan

>I talked to an SEM guy today who basically said the same thing, plus it would have to be coated with gold or iridium before scanning. He said he could probably get a better picture with a conventional microscope.

He didn't know the size of your object, but he said he has also had very good luck photographing tiny things by shooting through a jewelers loupe.

BTW, you are insane!

JKJ

Re: new micro goblet

#11

Re: new micro goblet

john lucas

>Mark I actually found ebony to be a bad wood when you get down to the micro size. It has little pores that are invisible to the naked eye. If one of those ends up in the stem it breaks. It is great for Doll house size pieces and will hold very fine detail. At least until it's magnified 20x then you see a loss of crispness.

So far the woods that have worked best on the truely small scale are Yellow heart, cherry and sometimes maple. I've had good maple and bad maple so I guess it depends on the type of tree. Holly is good to a point but gets too flexible when making goblets. It is fantastic for bowls and hollow vessels. I haven't tried the other fruitwoods yet but some of them have very fine grain and might work well.

Re: new micro goblet

#12

boxwood?

John K Jordan

>Have you tried boxwood? The piece I have is quite hard, seems strong, and has a very fine grain.

Hey, I could send you a toothpick, enough for about a dozen goblets. :)

I'm waiting to see the tiny plate to go with the goblet. Maybe Schwing could carve a spoon.

JKJ