Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Mom's Gavel

Posts

Mom's Gavel

#1

Mom's Gavel

Molly Winton

>Well I made the gavel today. This was a perfect exercise to prove to me why I make hollow forms and bowls, and stay far away from spindles that require precision, measuring, duplication (one side looks the same as the other), etc. ICK!! By the way, making coves sucks! I like the head, but am not too fond of the handle.

I have an increased respect for all of you spindle turners.

The head is 3 1/4" long X 1 7/8" diameter. The overall length is 9". It is finished with microcrystaline burnishing compound and wax. South American mesquite.


img

Re: Mom's Gavel

#2

Looks good to me, Molly.

henthorn

>I bet she loves it.

Re: Mom's Gavel

#3

Very nice Molly!

Jorge Castaneda~Downeast Maine

>Mom' will be delighted, if you did not mention it nobody would know it gave you any trouble, and looks good, I hope its voice is commanding and it will do a fine job.

Maybe this piece is the opening to a whole other line of work... :o)

Thanks for sharing

Jorge

Re: Mom's Gavel

#4

Good heaven's NO Jorge!!

Molly Winton

>

Re: Mom's Gavel

#5

I like it!

Eddie Pacheco; In Tucson for a few days

>I wonder, though, if you have created a weak area on the handle just before the two small beads. It just may be the picture. Mesquite is pretty hard so it will take a heck of a whack to break it.

Re: Mom's Gavel

#6

JL

Re: Looks good...

JL

>Now - speaking of duplication - can you make three more just like it? :). Wait until you have to start doing legs :)>

Re: Mom's Gavel

#7

Re: Looks good to me, Molly.

George Van

>Molly, great looking gavel, your mom will be proud to have this and her friends will be amazed that her daughter made it for her. I had to do spindle turning recently and I agree with you 100%, those spindle turners, skews and spindle gouges in hand, are really talented. When you look at the sharpness of detail, including those perfect coves, beads, and combinations of both, produced multiple times, I am humbled.

Re: Mom's Gavel

#8

That's why...

Peter Teubel

>...we spindle turners have lots of calipers.


img

Re: Mom's Gavel

#9

Re: Mom's Gavel

john lucas

>Looks beautiful to me.

Re: Mom's Gavel

#10

Re: Mom's Gavel

Ed Karch

>Nice job Molly. I could probably get you a commission for about 350 more. :o}

Re: Mom's Gavel

#11

Re: I like it!

Molly Winton

>I thought that too Eddie. The diameter at that point is 1/4", so I'm thinking it will withstand the use. Time will tell. If I get a call from my Mom telling me how she knocked out a poor little old lady when she knocked the head off while bringing her club back to order, I'll disavow any responsibility, and blame it on her agression.

Re: Mom's Gavel

#12

CLUNK...........that's me fainting

Molly Winton

>

Re: Mom's Gavel

#13

Hey Molly

Steven Kubien

>I really like it and I think Mom will be very happy. Also, I can completely understand your issues with doing measured or duplicate-type work. My lack of measuring skills are part of why I love turning so much as opposed to flat work.

I have a cherry salad bowl at one gallery and the customer wanted 6 smaller ones to go with it as a set. I was fearful at first about trying to make six bowls which all matched and went with the larger one. Thankfully, he said, "Good heavens no, I don't want them to match! That would be boring. Give me 6 out of different woods and similar, but not the same, design."

Definately my kind of customer!

Well done and thanks for sharing.

Steve Kubien

Re: Mom's Gavel

#14

My kind of customer too!

Molly Winton

>

Re: Mom's Gavel

#15

Beautiful gavel, Molly!

John K Jordan

>I think the design and workmanship are both excellent. I don't like a wimpy handle and with the flare towards the end this one looks easy to hold and well balanced.

As for the calipers, I thought I was bad keeping nearly ten at hand. Most of mine are the cheap vernier calipers - the good divider type are pretty expensive. (Peter, why is most of the right cabinet door empty? You'd better buy some more tools, quick!)

While I like to turn an occasional bowl, I must admit I have the most fun spindle turning.

JKJ