Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

mini goblet photo

Posts

mini goblet photo

#1

mini goblet photo

john lucas

>I had to shoot this micrometer with gear in the teeth today so I did a shot with my mini goblet in the jaws. The gap is 3/8" just to give you size relationship. The goblet is .054" tall.

Re: mini goblet photo

#2

maybe I should post the photo? :) 

john lucas

>


img

Re: mini goblet photo

#3

Re: maybe I should post the photo? :)

Bill Grumbine (Kutztown PA)

>So John, the question now becomes, how did you mike it? (ouch!)

Bill

Re: mini goblet photo

#4

Wow! That's a huge micrometer!

adrien Coblentz

>

Re: mini goblet photo

#5

Re: mini goblet photo

Ron in Drums PA

>Did you use a tiny lathe with tiny tools??? :-D

Re: mini goblet photo

#6

Re: maybe I should post the photo? :)

john lucas

>Bill I used my calipers to measure it and even that was hard and I'm sure not accurate but probably within a few thousandths. When I turn the small one I'm taking it to the pros to measure it.

Re: mini goblet photo

#7

Re: mini goblet photo

john lucas

>Ron Tiny tools, big lathe. I used jewelers screwdrivers reground as gouges and skews to turn it. I used my Powermatic 3520 to turn it. I did drill the end of a tool rest and installed a 1/8" roll pin so I would have a smaller tool rest.

I've since made new smaller tools and a special tool rest just for miniatures. It really looks funny. It's a 1" post that I've reduced down to 3/8" and then installed a 1/8 x 3/8 x 3/4 inch tool rest on top of it. The new tools are made from .030" piano wire. I'm going to try them out tomorrow and see how small I can go.

Re: mini goblet photo

#8

Steven Antonucci

What do you do with all of the offcuts?

steve antonucci

>Maybe you could make a micro-segmented piece from them.

You are truly insane, John :-)

Steven

Re: mini goblet photo

#9

Re: maybe I should post the photo? :)

Bill Grumbine (Kutztown PA)

>Thanks John. I have to confess though, it was a poor attempt at a pun. You know, make, mike? ;-) Think of an Australian accent, as in, "How did you mike it, mate?"

I am truly curious though, despite the bad humor, to know what size it turns out to be as well as what tools you used to make it.

Bill

Re: mini goblet photo

#10

Re: maybe I should post the photo? :)

Jennifer@Indy.USA

>John, I love the texturing. Did you use the Hunter -4 cutter to hollow the cup?

;)

Re: mini goblet photo

#11

I think

Ron in Drums PA

>I believe he used the #0000 Hunter tool, it's still under development and not yet available on the market. John had a chance to test the tool for Mike and this is what he came up with.

Re: mini goblet photo

#12

It's the Hunter tool you can't see :)

john lucas

>It's so small your spouse won't see it so they won't be angry that you bought a new tool. When your friends come over you can show them the tool that they can't see. They will pretend like they can see it so they won't be left out.

Re: mini goblet photo

#13

Re: maybe I should post the photo? :)

Barry Elder

>Nice looking mic! Love the blue background?! (Snarfle)

Re: mini goblet photo

#14

Have to Admit, John

Mark Mandell - Gone Round In Jersey

>You're pretty good with small tools.

|;-}}}

Re: mini goblet photo

#15

My only question is...

keith zimmerman, Normal IL

>How do you see that close to even attempt to hollow a goblet that small. Are you using an electron microscope from the school?

keithz

Amazing work John.

Re: mini goblet photo

#16

Re: My only question is...

John K Jordan

>I was just thinking that a scanning electron microscope could make a fantastic picture of that. That one has to be the smallest I've seen.

The problem I had when trying to make tiny things was finding wood fine-grained enough that irregularities from the grain didn't look relatively huge.

JKJ

Re: mini goblet photo

#17

Interesting way to reduce your wine consumption.

Brian Hahn in SW Wisconsin

>

Re: mini goblet photo

#18

Re: Made me laugh at THAT one!

Al Crandall -NW of Indy-

>

Re: mini goblet photo

#19

Re: mini goblet photo

Steven Kubien

>I hope you cored out the top so as not to waste wood. Hey, I'm just suggesting!

Steve Kubien

Re: mini goblet photo

#20

Re: mini goblet photo

john lucas

>Steve when I get really good I'll core out the goblet top and make something from that. :)

Re: mini goblet photo

#21

Re: mini goblet photo

don lewonczyk

>John you sure you weren't overloading the 3520? Where are the cupcakes to go with the milk in that huge goblet? Your mind must be like a maze but it seems you have no dead ends in there, im with the other guy I think you are insane but in a way to be envious of. Waiting for the smaller one to come along and this time with the theaded cupcake lids. Take care, DonL