Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Mini lathe bench

Posts

Mini lathe bench

#1

Mini lathe bench

Jim King

>I made this thing up as I am getting a mini lathe and had no place to put it. It can also be used as a work bench

It is made out of Bloodwood and the top is 1 x 5�s laminated together and the whole thing weighs over 550 pounds. This was our first attempt at casting brass vice plates but they turned out OK.

It has six pullout drawers with covers so things inside stay clean.


img

Re: Mini lathe bench

#2

Steven Antonucci

Bloodwood! You're killing me!

steve antonucci

>I love the stuff you guys come up with. What the heck do you guys use for firewood down there?

That's an awesome looking bench, Jim.

Steve

Re: Mini lathe bench

#3

Keith Tompkins

Re: Mini lathe bench

Keith Tompkins

>Hi Jim.....I want one!! Mini-lathe? I think it would support a house! Awesome.

Re: Mini lathe bench

#4

That's not a lathe bench it's.....

Cyril Griesbach

>a piece of furniture....a piece of beautiful furniture!

Re: Mini lathe bench

#5

Re: Mini lathe bench

eaglesc

>Do you have any idea how may pens I could make with that bench, and I don't mean on it, WITH IT.

Beautiful piece of workshop furniture.

My three minis sit on "custom" ply wood counters.

Two Rikons and a jet and they are all about the same height.

Re: Mini lathe bench

#6

Re: Mini lathe bench

john lucas

>I'm with Keith, I want one. It would look great in my shop. You do good work.

Re: Mini lathe bench

#7

Re: It's a real beauty Jim, and....

Jamie Donaldson

>... I guess you did the brass casting from old artillery shell casings, but you're on the wrong continent to have a supply??

Re: Mini lathe bench

#8

Re: Bloodwood! You're killing me!

Jim King

>Steve:

This was a burnt log from a pasture that had been there for probably 50 years.

Re: Mini lathe bench

#9

Re: Mini lathe bench

Barry Turner

>I'm not one to quibble over semantics, but I think you may have a maximum lathe bench..........

Re: Mini lathe bench

#10

Re: It's a real beauty Jim, and....

Jim King

>Jaime:

We melted down some pipe from an old oil feild depository. Here is a photo of it heating up.


img

Re: Mini lathe bench

#11

Re: Mini lathe bench

keith zimmerman, Normal IL

>This bench would be worth building a shop around it.

keithz

Re: Mini lathe bench

#12

Jim, that is beautiful

Jim K in Trappe PA

>If, I were you, I'd give up turning and take up cabinetry! (Actually, I did the opposite, but i'm not you!)

Beautiful job, especially with the custom casting.

Jim K

Re: Mini lathe bench

#13

Re: Mini lathe bench

eliot d

>Magnificent! My very first woodworking project was a woodworking bench made of hard maple. It looks a lot like yours but no drawers. Yours is better.