Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Nova midi chuck problem

Posts

Nova midi chuck problem

#1

Nova midi chuck problem

Mike Cunningham (Cape May NJ)

>I have a question regarding a Nova Precision midi chuck and hope someone has an answer. I own a variety of chucks and seldom use this Nova so I have little familiarity with it. The other day I mounted it on the lathe and found that I was unable to open the jaws using the tommy bars, nor was I able to close them.

I looked at the Teknatool website and following the directions disassembled the chuck, cleaned and attempted to reassemble. The directions state that one should insert the #1 slide into the slideway which has a small half moon shaped dimple. I'm unable to discern this shape on any of the slideways. I've tried inserting the slides in numerical order starting at all four of the slideways and find that the chuck will not function regardless of the slides used.

Any ideas?

Thanks,

Mike

Re: Nova midi chuck problem

#2

Sorry, Mike, I've never used a Midi

Cyril Griesbach

>

Re: Nova midi chuck problem

#3

Nor have I, Mike. Sorry.

Allen Neighbors

>

Re: Nova midi chuck problem

#4

Re: Nova midi chuck problem

JERRY COX-TEXAS

>Mike....I disassembled both of my Nova Midi chucks; and could not find any reason, that they would bind. They are a simple design, and should be trouble-free.

Contact customer service at Teknatool site, for competent help.

Re: Nova midi chuck problem

#5

Re: Nova midi chuck problem

John K Jordan

>Mike,

I'm not familiar with that chuck but I've repaired a couple of jammed supernova chucks - perhaps they are similar. If so, do the jaws slide freely when not engaged with the spiral? Those I had would bind in the slots. The chuck had been seriously overpowered by a strongman and the metal chuck housing had deformed. I repaired by flattening the face then "machining" the insides of the slide groves with jewelers files and diamond hones. The chucks work fine now.

There was at least one thread on stuck chucks here in the last year or so if you want to search.

JKj