Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Powermatic 3520B lathe

Posts

Powermatic 3520B lathe

#1

Powermatic 3520B lathe

don lewonczyk

>My 3520B arrived at the warehouse in TN on Tuesday and I picked it up Wed. morning put it the shop and then did my farm chores. Didn't get back to it until Fri. morning and only opened the box to get owners manual out. Finally today after farm work mostly done I put it together, man what a horse, the head stock liked to killed me putting it up on the ways, no easy way to hold on to that thing and lining it up by yourself. Anyway this is to David who has the centers off on his 3520B by 0.007, as far as I can tell mine line up perfectly and after putting mine together I can see if you are reluctant to return yours for a new one with the work it was to set it up in the first place but I wouldn't settle for what you have but its your call. I still have to put the 18" ext. on and wire up the plug and then I'll be in good shape. Maybe some day I'll have time to learn how to turn something. Take Care and good luck. DonL

Re: Powermatic 3520B lathe

#2

Re: Powermatic 3520B lathe

john lucas

>Your gonna have fun. Deja Vu on the headstock. My friend and I bought ours together. I took the headstock off and carried it into the shop. It weights as much as I do and is incredibly awkward. When we got to my friends shop we rigged up a way to slide the whole lathe off the trailer and into his shop. We couldn't do that on mine.

I'm looking forward to see what you turn.

Re: Powermatic 3520B lathe

#3

Re: Powermatic 3520B lathe

don lewonczyk

>Hi John, don't know what you weigh but I know it was heavier than a bag of feed. My time in the shop is limited due to the farm work so I don't know when I'll have a chance to turn something useful or fun to do. At 69 im not getting any younger but im thrilled with the lathe. I have a torn tendon in my right shoulder been that way since I hurt it in 1985, back then I was told it was swollen and not much to do about it and its been a pain in the you know what since. I had a mri 2months ago at the VA in Nashville and was told it was torn so that also limits what I do depending on how I feel. BTW did you get a chance to sample the HC? Well got to go and try to get some milk down a brain damaged calf before I hit the sack. Take Care, DonL

Re: Powermatic 3520B lathe

#4

Re: Powermatic 3520B lathe

Ed Larson

>Don, enjoy the new lathe. I've had mine for 10 months and it's ajoy to use. Hope you can soon make some time to turn. Once you start I think it will be easier and easier to find that time to enjoy this great hobby.

Re: Powermatic 3520B lathe

#5

Re: Powermatic 3520B lathe

Mark Paulley

>Don,

Congrats on your new toy. As others have stated this expereince of turning is very addictive. It is not always what you turn but more that you are turning. It opens up a whole lot of fun, enjoyment and for me a creative side which I did no know I had.

Be safe and make time for your new experience you will be glad you

did.

Mark

Re: Powermatic 3520B lathe

#6

Re: Powermatic 3520B lathe

don lewonczyk

>Thanks for your encouragement and I'll try to find more time to turn. If I cut back on my cattle herd from about 175 head to around 90 or 100 that should help. Without even turning the lathe on I know I will enjoy using it, for the money I wasn't expecting a machice as impressive as this one. I always wanted a Oneway but this will satisfy anything I plan on doing with it. Thanks Again,DonL

Re: Powermatic 3520B lathe

#7

Re: Powermatic 3520B lathe

john lucas

>Don I've been so busy I forgot to try out the Hot Chocolate but I just came in from the cold shop and mixed up a batch. Man that's good stuff. Very different tasting, kind of like it has lots of marshmellows in it. Should warm me up nicely. Thanks.

Re: Powermatic 3520B lathe

#8

Dick Hines

Re: Powermatic 3520B lathe

Dick Hines

>Since you have yours all set this may help other people who have to move a Pm 3520.

When I got mine home back in '03 I had no one to help me get it off the trailer. In my shop I have a large "I" beam running from one side to the other. It happened to have holes drilled in the bottom "I" section. I took 2 bolet and 4 finder washers and a piece of chain and bolted it to the "I" beam.

Then I used another piece of chain wrapped in a couple of towels and rapped aroung the bed of the lathe. Then I put a 2 ton come-a-long between the to chains. A couple of cranks and the lathe was hanging in the ari. I used the head and tail stock as balance weights. Next I just pulled the trailer out from under the lathe and let it down onto a frame I made to get the height I wanted. Next I pusged the lathe where I wanted it next to the wall.

Of course it ended to back in the shop. Just hokked the come-a-long to my tow hooks on my truck and the stand the lathe was on. Persto! lathe was in the right possion.

The only help I had was just little old me. If anyone tries this please be careful. If the lathe falls on you you are toast.

Re: Powermatic 3520B lathe

#9

but that removes all the macho :)

john lucas

>

Re: Powermatic 3520B lathe

#10

Re: Powermatic 3520B lathe

dameek

>Interesting thread. I can't seem to find the thread that you speak to about alignment of the head and tail stock. If they are not exactly aligned there is no need to send it back. The lathe needs to be leveled front to back and side to side.

When I got my 3520b last year the head and tail stock didn't align with each other. A few minutes with a level and adjusting the feet it is now dead-on. Cast iron will flex.

Re: Powermatic 3520B lathe

#11

Re: Powermatic 3520B lathe

don lewonczyk

>The man David as I recall did all the things suggested to line up the centers including leveling the XY and Z without any differences and still being off the 0.007" the entire lenght of the bed. I know cast iron flexes, I bought a 8" jointer and right out of the box the fence had a bow in it a 1/2" or more right in the middle, the rep told me to lay it on a couple of 2x4's on the ends with the bow facing up and jump on it in the middle. I thought he was crazy but did as he suggested and sure enough the stress was relived and the fence straightened out and has been that way for the last 8 years. To me it would stand to reason that either the headstock or tailstock was milled off by 0.007" being that the ways were leveled true and the 0.007" is off down the whole length. If the ways were not level then the 0.007" would not be the same the lenght of the ways, the readings would change. Hey I finished 10 grade so what do I know? Oh, BTW when I put mine together and installed the ajustable feet I just eye balled it , didn't count the threads didn't put a level on it just gave it a good shake to see it was sitting square and solid and my centers still lined up perfectly, what can I say? DonL