Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Right Onnnnnn, Jamie!

Posts

Right Onnnnnn, Jamie!

#1

Right Onnnnnn, Jamie!

Mark Mandell - Gone Round In Jersey

>When you said that sycamore would move. Got it round and started hollowing the next day and it's 1/2" out of round already!

I'm adding water to slow the dry because I've got buried nails (3 @ "hisssssss/BANG!" so far) on the interior that make the hollowing a slow go until I can cut through them. The my cobalt alloy cutters are doing well but slow. Obviously I pulled my $20 Hunter cutters out of service here; no sense having those crack trying to cut nails.


img

Re: Right Onnnnnn, Jamie!

#2

PS

Mark Mandell - Gone Round In Jersey

>15-1/2"

Re: Right Onnnnnn, Jamie!

#3

Inflate it :)

john lucas

>Mark Just turn it thin seal the ends and sell it with a Basketball inflater. Of course that might work better with Madrone that tends to move on it's own.

I have carbide metal cutter for my metal lathes. I think I'll save one of the tips to go on my boring bar for the situation you just mentioned. I've only run into a nail once so far.

Re: Right Onnnnnn, Jamie!

#4

Have you considered...

Brian Hahn in SW Wisconsin

>Wrapping the outside with a stretch plastic film? That would drastically reduce the moisture loss while you are turning.

Re: Right Onnnnnn, Jamie!

#5

Steven Antonucci

Can you pull the nails?

steve antonucci

>Looks like you might be able to get a hand inside with a visegrip?

Drill around the nails and pull them?

Steven

Re: Right Onnnnnn, Jamie!

#6

Re: Right Onnnnnn, Jamie!

Mike Rubes, Apex, NC

>Hi Mark,

Nice!!! Does the Stubby even break a sweat with something that big?

Just curious. Still dreaming of big Iron here in Apex and am starting to consider all options :)

Mike

So many factors to consider in Apex, NC

Re: Right Onnnnnn, Jamie!

#7

Re: Wrap, Sweat & Nails

Mark Mandell - Gone Round In Jersey

>"Lucreeeetia Mc", . . . opps, wrong group.

Hollowing's now done and I'm about to reverse onto a chuck to turn off the mounting area excess. I'm just as happy to let it dry, Brian, because what the wood does now will play a big part in how the piece is completed. This will be carved and those stress lines and cracks from the drying will be important elements.

Steve, After removing 11 [e-l-e-v-e-n] 1" nails ("No hunting" signs, I'll bet) I actually got it down to a system. When I 'find' a nail, I cut a groove on either side of it, then took my long goat's foot, and pound it into the wall and the nail. Broke out a chunk of wood holding the nail. Nice and easy. There are 2 nails I couldn't get because they're in the opening end. They just got sheared off. If the carving on that end exposes the heads, I'll pull them out that way. NBD, but the piece won't pass airport security.

Mike, Stubby didn't sweat this one at all even though between the different wood densities and the whole thing shape-changing, the piece never got near what I'd call balanced. Yes it lathe wiggled, but everything (rest and hollowing rig) wiggled the same way so it all stayed in something like sync, and we never got to the dancing stage.

mm

Re: Right Onnnnnn, Jamie!

#8

Re: Inflate it :)

Mark Mandell - Gone Round In Jersey

>I like that idea! Next one . .

BTW, I was working the Hunters at 35� but found that they cut this spalted wood better and smoother at about 15� and I cleaned up the center nubby at dead flat.

Re: Right Onnnnnn, Jamie!

#9

Re: Inflate it :)

john lucas

>Mark I was experimenting while turning boxes this weekend and to get the cleanest cuts you really do have to find a new sweet spot for diffenent directions. For example along the bottom I found quite steep to be the best but as I progress through the transition area to the sides I found it cut cleaner if I flattened it out to about 35.

When hollowing I tend to use the tools flatter because they cut much faster.

Can't wait to see what your doing to it after it comes off the lathe.

Re: Right Onnnnnn, Jamie!

#10

Re: Off The Lathe

Mark Mandell - Gone Round In Jersey

>Just finished the other end with the chuck in expansion mode.


img

Re: Right Onnnnnn, Jamie!

#11

Any Bets?

Mark Mandell - Gone Round In Jersey

>I can cut off the remaining nubbie withit on the lathe and not have it bust loose and go flying?

Hint: Look at the "soundness" of this wood!


img

Re: Right Onnnnnn, Jamie!

#12

Re: Any Bets?

Brian Hahn in SW Wisconsin

>You can do it. Piece of cake.

If that center were carrying any load, it would be half buried in that punky wood.

Re: Right Onnnnnn, Jamie!

#13

It Was

Mark Mandell - Gone Round In Jersey

>I was using a solid point center (rather than a cup) to match with the marked center from my faceplate and it was in there about 1/2". If I had trimmed more, the force keeping the piece in the chuck would have cracked the punk, I think. Remember that the ball has 2" thick walls that are not dry so there was still plenty of weight and force going round.

I woosed out and took the last piece off with the 36 grit on the 4" grinder. |;-}}

Re: Right Onnnnnn, Jamie!

#14

Steven Antonucci

What was the finished weight?

steve antonucci

>How thin did you manage to get it? 1/2"?

Steven

Re: Right Onnnnnn, Jamie!

#15

Re: "Finished" weight

Mark Mandell - Gone Round In Jersey

>now is about 45lbs.

The walls are about 2" thick because it's going to be carved pretty deeply and I needed the extra wood.

mm

Re: Right Onnnnnn, Jamie!

#16

It was probably quicker that way too.

Brian Hahn in SW Wisconsin

>It didn't look like the center was buried that deep in the photograph.