Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Jumbo Jaw Buttons.............

Posts

Jumbo Jaw Buttons.............

#1

Jesper, Denmark

Jumbo Jaw Buttons.............

Jesper, Denmark

>I have to replace the rubber buttons on my Oneway Jumbo jaws. After several years of use, the rubber is getting so hard that it mars the edges of the bowl it is holding. That this is happening is OK, after all, it is normal for rubber to harden and get brittle with time.

The cost of a new set of 8 from Oneway, when you include the shipping to EU gets to be close to $10 per button, which when you add 25% VAT over here gets a little ridiculous.

Does anyone have a different idea for replacing these buttons? They sort of look like the bumpers used on toilet seats in the ol' days.

It would also be interesting if thesre is a lokal price in Canada or US, so I could get a friend to buy locally and send over in an envelope.

I am kinda looking forward to aseeing all the innovative suggestions from the forum.

Thanks,

Re: Jumbo Jaw Buttons.............

#2

Leo Van Der Loo

Re: Jumbo Jaw Buttons.............

Leo Van Der Loo

>$25.95 at Oneway, they ship.

Have fun and take care

Leo Van Der Loo

Re: Jumbo Jaw Buttons.............

#3

Re: Jumbo Jaw Buttons.............

Halsey

>Packard also has them. Halsey

Re: Jumbo Jaw Buttons.............

#4

Steven Antonucci

Depends on how bad you want to

steve antonucci

>avoid spending money.

I lost one in a pile of shavings years ago, and turned a replacement out of corian. You could also use hardwood just as effectively.

Steven

Re: Jumbo Jaw Buttons.............

#5

Re: Jumbo Jaw Buttons.............

JERRY COX-TEXAS

>I bought some rubber stoppers at a home store for about $1 each.They are about 5/8" at base, 1" at top and 1 1/4" tall.I bought longer bolts of the came thread as my jaws; and, drilled through the center of the rubber, top to bottom....this works great inside or outside hold...I have used them for 2 years, and am very pleased

Re: Jumbo Jaw Buttons.............

#6

Re: Jumbo Jaw Buttons.............

Bill Stehman

>Jasper,

I use a small piece of the blue 3m masking tape to tuck under the bumpers and adhere to the jaws thus preventing any marring.

Anything will also work, wax paper, regular paper but cloth was a hassle to work with.

Bill

Re: Jumbo Jaw Buttons.............

#7

cover with white rubber cane tips

robert davis

>ace hardware has then in many different sizes. i use them over a drilled dowel on my longworth chuck

Re: Jumbo Jaw Buttons.............

#8

Re: Jumbo Jaw Buttons.............

Mark Strang

>Go to science laboratory supply house and get beaker stoppers that have a hole in them for glass tubing. You might have to get longer screws to go all the way through the stoppers. I have found that these are longer and have a nice taper on them which allows me to get a better grip on the piece that I'm turning compared to the stock buttons. They are black and will result in marks on the wood but I simply take a piece of blue painters tape and wrap it around the outside of the bowl. This solves the marking problem. This modification is also very very cost effective.

Re: Jumbo Jaw Buttons.............

#9

Vinyl Tubing

Ron in Drums PA

>Vinyl tubing covering the screws works well.

Re: Jumbo Jaw Buttons.............

#10

Re: Vinyl Tubing

Donna Banfield

>To continue what Ron suggested, I used the clear plastic vinyl plumbing tubing OVER the black bumpers. The vinyl tubing is easily replaced at any hardware/plumbing supply store, and you never need to replace the black rubber bumpers that mar your turnings. Just make sure that you get the right size I.D. (inside diameter) that will fit over the bumpers.

Re: Jumbo Jaw Buttons.............

#11

Re: Jumbo Jaw Buttons.............

Duane C.Leach

>Try WELL NUTS. I think that is what they are called here. They are very much like the buttons that cam with the cole jaws only black. I got them at Lowes.

Duane

Re: Jumbo Jaw Buttons.............

#12

Jesper, I haven't read the other...

Allen Neighbors

>posts yet, so I hope I'm not giving somewhat of a repeat.

I'm not familiar with Denmark, so I don't know what you can get over there. (well, it is 'over' from where I'm at. :))

I had a set of the same type of jaws for my SuperNova2 chuck, and needed bigger buttons.

I took 8 small, white, rubber, cane tips. The inside of them is about 1/2" dia. I inserted a piece of vinyl tubing to fill the inside of the cane tip... the tubing is 1/4" inside diameter, and 1/2" outside diameter. I drilled through the cane tip, using the 1/4" hole in the tubing as a guide.

Then I got some longer 6mm flat head screws to use to hold them to the jaws. They worked better than the originals.

I also use the same buttons on my Longworth Chucks.

Hope this gives you an idea.

Re: Jumbo Jaw Buttons.............

#13

Jesper, Denmark

Re: Jumbo Jaw Buttons.............

Jesper, Denmark

>As always, the ideas spring forth in abundance. Thank�s for all the suggestions.

There are several things I will try to get to replace the originals, and I will report on the results.

I have no complaints of the originals, but I am a little miffed that Oneway wants �29 instead of $29 for the set, a 50% increase. That either the USPS or Post Canada then add more than the cost of the parts is not Oneway's fault, but still make it a silly cost for what they are.