Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Drain your compressor every day?

Posts

Drain your compressor every day?

#1

Drain your compressor every day?

Jim K in Trappe, PA

>Everything I read about compressors says you should relieve the pressure and drain the condensation every day. Do you follow these guidelines? I could see doing it every week, but is it necessary daily?

I also know that you should relieve the tension on your bandsaw when not using it, and never move your toolrest when the lathe is turning, and I agree, YOU should follow these rules. Me however.... ;-)

Just wondering.

Thanks,

Jim K in Trappe, PA

Re: Drain your compressor every day?

#2

Re: Drain your compressor every day?

don at central illinois

>I KNOW I should drain it at least weekly but it probably hasn't been drained in a couple of months. Thanks for the reminder, I'll have to do that this weekend. I don't think weekly is necessary but I also think it depends on how much you use it, how often it recycles, etc.

Re: Drain your compressor every day?

#3

Re: Drain your compressor every day?

Ken Bellock (Houston, TX)

>I used to hate draining the compressor, until I installed a ball valve where the drain is. Now I do not have to empty the air first. I just reach under the tank, open the valve for a second till the water clears and then close it. Cost me about $5 for the parts, 10 minutes to install, and made an annoying job real easy and quick.

Ken

Re: Drain your compressor every day?

#4

Re: Drain your compressor every day?

Doug Thompson near Cleveland

>Only when it starts spitting water, I use a filter went using the spray gun. My compressor just quit after 18 years it ran twice a day because of a leak in the hose reel out in the garage.

Re: Drain your compressor every day?

#5

Re: Drain your compressor every day?

Jim K in Trappe, PA

>Ken,

Sounds promising. Can you give more details?

Thanks,

Jim

Re: Drain your compressor every day?

#6

Re: Drain your compressor every day?

Bill Hale / The Wood Spinner

>I use mine a lot. I removed the mfg. valve on the bottom and added about 3 ft. of air hose with a coupling on the out going end. Every couple of weeks I just plug in an airgun nozzle and blow off until water quits. My compressor is never turned off.

Bill

Re: Drain your compressor every day?

#7

Re: Drain your compressor every day?

Ken Bellock (Houston, TX)

>I took pictures as I did it to show a friend with a similar compressor. I'll post them later tonight when I get to the home pc.

I have a 26 gallon stand up Porter Cable compressor. I removed the standard drain petcock and screwed in a 2" nipple, then attached a street elbow, followed by 6" nipple and a ball valve. This also creates a little area at the bottom that's brass to collect the water before you blow it out. Hopefully that makes the tank last longer, the water always comes out clear the way I have it now.

I used to leave the compressor empty after draining it till the next time I needed it, but it always seemed like I would be waiting there for the tank to fill up, just to blow something small clean. Now it's great to have it full all the time.

Hope this helps!

Ken

Re: Drain your compressor every day?

#8

Dick Hines

Re: Drain your compressor every day?

Dick Hines

>Since I use my bandsaw 4-5 time a week I never release the tension on the blade. My old band saw was 50 years old and as far as I know my grand father never lrelaces the tension. The only reasion I got rid of it was it did not have enough grunt with the old 1/2HP motor to cut wet wood.

Now for draining my compresser. Let's see.....maybe Jan of this year. Guess I will do when I go to the shop tonight.

Thanks for reminding me.

Re: Drain your compressor every day?

#9

Re: Drain your compressor every day? No

georgetroy

>I don't drain maybe once every six months. I never release tension on my bandsaw, too dangerous if I do. I might forget I have a loose bandsaw blade. Powermatic bandsaw now ten years old. I always move my tool rest safely when the lathe is running?

Re: Drain your compressor every day?

#10

Re: Drain your compressor every day?

Allen Neighbors

>Compressor: I have a big, antique air compressor - 30 gallon tank, which is connected via airline to a 40 gallon John Deere Tractor Butane tank for volume. When it recycles, it runs for five minutes. The 30 gallon drain is piped outside my shop where I have a 1/4 turn ball valve to open the drain, and I do it about once a month. The Butane tank is in a small shed outside my shop, and isn't fixed to drain that easy, and it's hard to get to, so I drain it about every year... sometime during the summer. I never drain the air completely, but I do turn it off at night, because I don't want something to blow and burn it out before I get back.

Bandsaw: It's a cheap Crapsman 12". I release tension 2 complete turns of the tension handle when I'm finished using it, and re-tighten 2 complete turns when I'm ready to use it.

Toolrest: I know the rule... but sometimes I move it while the piece is spinning. Just depends on what I'm doing at the time.

That's my story and I'm sticking to it. :)

Re: Drain your compressor every day?

#11

Re: Drain your compressor every day?

Brian Hahn in SW Wisconsin

>I drained my compressor last year, or was it the year before?? I'm sure I've done it at least 3 times this decade.

I remove the tension from the band saw only when I'm using a wide blade and have the tension cranked all the way up. A snap clothes pin on the blade reminds to set the tension.

I rarely stop the lathe before moving the tool rest. Why should I when I can clearly see the spinning piece and the tool rest?

Re: Drain your compressor every day?

#12

Re: Drain your compressor every day?

Steve Russell

>Hi Jim,

I opted for the ball valve setup as a few others have mentioned. It is much easier than crawling under the compressor to open that teensy, tiny hard to get at petcock valve. I also added a long length of clear tubing, so I can dump the water into a bucket easily for disposal. I drain my tank about once a week, more frequently during the summer as I live near the heat and humidity capital of the known and unknown universe - Houston, Texas. :-o Take care and best wishes to you and yours!

Steve Russell

Wednesday Night Turning Chat Moderator

Re: Drain your compressor every day?

#13

Re: Drain your compressor every day?

Jennifer@Indy.USA

>I probably drain mine once a year, and every time I do and the orangy rusty water runs out I promise myself that I'll be more diligent at doing it regularly but I don't. Releasing the air out of the tank daily was explained to me once like this. Do you drain the air out of your car tires every day? So I don't do that either.

Jen

Re: Drain your compressor every day?

#14

Re: Drain your compressor every day?

Barry Turner

>I bought a Husky 6 HP (yeah, right!) compressor with a 60 gallon tank from Home Depot a couple of years ago. I replaced a 30+ year old Crapsman 2 HP with 30 gallon tank that had developed a bad leak in the tank. It had rusted through the tank on the bottom, probably from not having the moisture drained regularly. Still, it lasted over 30 years.

I promised to be diligent with my new compressor and drain the water from the tank weekly, daily or whatever. I didn't want the new tank to rust through like the old one did. Well, guess what? There's never any water in the tank to drain! Just a tablespoon or so every few months.

I think how often you drain the tank depends on freqency of usage, prevailing humidity in the shop and a little common sense. I use my compressor mostly for blowing wood chips and shavings off my lathe. The compressor cycles once or twice a day.

I don't think there is much benefit to opening that valve in the bottom of the tank if no water comes out. I don't drain the air either when I'm finished either. I do close the valve at the regulator and take the pressure off my air hose, though.

Re: Drain your compressor every day?

#16

Thanks for the reminder

Ron in Drums PA

>I'll drain tomorrow

Re: Drain your compressor every day?

#18

Re: You and always install a

Keith Newton

>Hey Juergen, I have looked for these, but didn't find these. Thanks for that link. Do you have these, and know just how they work?

I have an old Roll-Air which developed a small leak in the bottom of the second tank, so I ask a friend who is closing his machine shop if he would help me fix it. When I told him my problem, he sold me a new pair of tanks for $30 which already have automatic drains on them. Someone had bought a new compressor, then burned it up by running it without oil. ;-)

I have not switched my motor and tank over to them yet, but when I do, I want to see if I can repair the old leaky ones by welding on a fitting with these, and give it to my nephew.

Re: Drain your compressor every day?

#19

Denis Putland

Re: It is probably not a good idea to

Denis Putland

>try repairing any pressure vessels with out proper testing equipment????

Denis

Re: Drain your compressor every day?

#20

Re: Drain your compressor every day?

Barry Irby

>I have a 37 year old Craftsman?Emerson air compressor. I've drained it about once a decade. 3 maybe 4 times. One time, there was a little air pressure left in the tank and it blew the plug out of my hand and it took about an hour to find it. My thought was that if it were going to act like that, I was not going to play. Wonder if I have shortened the life of the tank?

I have filed the back edge of my tool rest to a keen edge. I just move the banjo up to the spinning wood and Voila!, a dowel.

I like to take a proactive approach to tool care so I installed a Carter Release on my band saw. It has a Big red knob on it. So when I am leaving the shop, I look to see if the Bozo Nose is down. If so, Good, if not, maybe next time.

Re: Drain your compressor every day?

#21

Thanks Ken!

Jim K in Trappe, PA

>

Re: Drain your compressor every day?

#22

Re: You and always install a

Russ Babbitt

>Got one of this a time ago and couldn't figure out how to make it work. I think they type of compressor makes a difference.

Re: Drain your compressor every day?

#23

Re: Drain your compressor every day?

Larry Bisbee

>I want to thank Jim Trappe for reminding me to drain my compressor, which is something I've only done twice the ten years I've had it, and Ken Bellock for the great idea that he posted to make the job easier. Now that I've installed a ball valve it won�t be such a hassle to drain.

Re: Drain your compressor every day?

#24

Re: Drain your compressor every day?

Terry Jonasson

>How about installing an truck air brake system "Automatic Drain Valve", Bendix is a good one. Head over to your local truck parts supply store and find one in the proper thd size for your tank drain, install it and it will drain itself when moisture builds up enough to release with it's own air pressure. It does make funny sounds at unexpected times BUT it works and you don't have to remember.

Re: Drain your compressor every day?

#25

Re: Drain your compressor every day?

mfoster

>Well, I went to the closet under the shop that houses both the compressor and the dust collector. Both needed attention. It has been a few months since I reached under, figured out which way to open the drain-cock, drained the tank and promptly installed a ball valve to make it easier next time I think of it. (I actually had contemplated doing this before, just put it off).

While I was there I checked the 35 gal bin under the cyclone-full. Emptied it and found it was so full the cyclone was full and it had overflowed into the filter and filled it up with shavings. I just completed a flat project that required a lot of jointing and planing. I had already emptied the bin once on the project and figured I was OK, but I guess not. I need a bigger bin under the cyclone, but just don't have room for it.

Thanks for the goading.