Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Tailstock Locking Plate

Posts

Tailstock Locking Plate

#1

Tailstock Locking Plate

keith zimmerman, Normal, IL

>Anyone know of someone that makes replacement locking plates for a Jet mini? I've heard of them, but can't find anyone. I've having real problems with mine and need to replace it before I destroy the cam.

keithz

Re: Tailstock Locking Plate

#2

Re: Tailstock Locking Plate

Cyril Griesbach

>Keith, couldn't you just take it to a fab shop and have them make you one? I'm assuming you've already checked with Jet.

Re: Tailstock Locking Plate

#3

Re: Tailstock Locking Plate

john lucas

>Keith I made one for the Jet that I sold and plan to make another one for the one that I still have. I may still have the plans. I'll look tonight. It is just a big rectangular piece that is the full length of the tailstock and wider than the gap. On top of that I glued a piece that is the same width as the gap minus a little. Then drilled a hole through it. The metal I used for the bottom was too thick so I had to counter bore a hole which requires a mill or lathe. If you buy the right thickness of metal you won't have to do that.

Re: Tailstock Locking Plate

#4

Re: Tailstock Locking Plate

Doug Thompson near Cleveland

>Randy at Monster tool has them.

http://www.monster-wood-tool.com/wst_page8.html

Re: Tailstock Locking Plate

#5

That's a good deal- thanks Doug

john lucas

>

Re: Tailstock Locking Plate

#6

Re: Tailstock Locking Plate

Jerry from Lapel In.

>Call Ray Thompson at Indiana Innovators, he has them ready to ship.

Re: Tailstock Locking Plate

#7

Thanks Jerry...sent him an email

keith zimmerman, Normal IL

>

Re: Tailstock Locking Plate

#8

Re: Tailstock Locking Plate

Ron McKinley

>Thanks Doug. I just ordered a set......Ron

Re: Tailstock Locking Plate

#9

Re: Tailstock Locking Plate

Ron McKinley

>Just got mine a few days ago and installed them yesterday. What a difference! If you have a Jet Mini I highly recommend Randy's T-nuts. Tailstock slippage has been a problem from day one. But not now........Ron

Re: Tailstock Locking Plate

#10

Re: Tailstock Locking Plate

Jerry from Lapel In.

>Email Ray Thompson at ,(rayt@indy.net) he has them ready to ship and the are priced 1 at time, no need to buy 2 if you only have 1 lathe.

Re: Tailstock Locking Plate

#11

Re: Tailstock Locking Plate

Jerry from Lapel In.

>I forgot to mention I think he has one that will fit the banjo also.