Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Vintage Lathe Restoration

Posts

Vintage Lathe Restoration

#1

Vintage Lathe Restoration

David Miller from Iowa

>Hi - first time poster here, but been a regular on the over on the Hand Tool board for years.

Just picked up a vintage lathe (see pic) and had some questions for you all. This thing must weigh close to 400 pounds.

Unmarked except for some casting codes. Any idea what brand this could be? The seller said it was a converted metal lathe and he thought it might be a "Hubbard" - I googled this with poor results.

The original finish is fair but there are a lot of home-drilled holes in the side of the bed I would like to fill and hide. The feet are pretty rusty as well. What is your thinking on refinishing an item like this? Yea or nay?

It has a very old 1/3 horsepower Emerson motor that seems to work OK. Would you folks let it ride or go ahead and upgrade the motor to something from this century?

Needs a few parts - the tool rest is functional, but I would like a longer one. Several of the lockdowns are hex bolts and I would like to get cast iron levers instead - best place for finding parts for this?

I am a pretty tall fellow and my ideal working height is about 3-4 inches taller than this machine. Obviously I could block it up pretty easily, but do any of you have an elegant solution for this?

Thanks, Dav


img

Re: Vintage Lathe Restoration

#2

Steven Antonucci

Some ideas

steve antonucci

>Don't know what you intend to turn, but you can add feet to change the height or add space blocks under the headstock and tailstock to increase the swing and change the spindle height.

1/3 HP is a no go in my book unless you only plan on spindles.

As far as holes go, I'd leave them for now. I have a bunch of magnets on mine to stick tools to, and I'm guessing the holes were for tools to be close by. You might just want them if you filled them.

Steven

Re: Vintage Lathe Restoration

#3

Dick Hines

Re: Some ideas

Dick Hines

>Other than changing the motor I would leave it as is. It looks in good shape Aand would be cool to turn on an old piece of iron like that. I bet you can find a tool rest that will fit, if you look around.

As far as the height you can do like Steve was talking about and block the lathe up. That's what I did with my Powermatic.4" blocks worked for me.

Re: Vintage Lathe Restoration

#4

Re: Vintage Lathe Restoration

Bill Gasper

>Dave, I suggest you take a look at the Old Woodworking Machines website at http://www.owwm.com Unfortunately, they seem to be having technical problems now but it is a great resourse for information and photos of all type of woodworking equipment.

Bill

Re: Vintage Lathe Restoration

#5

Re: Vintage Lathe Restoration

Cyril Griesbach

>David, this doesn't look like any metal lathe I've seen. I agree with Steve that 1/3 HP is limiting and it's a lot easier to block the legs to get the added height than trying to make riser blocks for the head and tail stocks. But I warn you to be careful...this turning thing if a path that, for most of us, has no return.

Re: Vintage Lathe Restoration

#6

Re: Might have b een a metal spinning lathe.

Al Crandall -NW of Indy-

>Without better detail of the tailstock, I think I see a production type of lever feed for the tailstock spindle.

Re: Vintage Lathe Restoration

#7

Re: Vintage Lathe Restoration

Brent English

>David, I urge you to do the minimum to the machine to make it usable again. Too many of these great old girls are getting cut up and modified, loosing what little antique value they have and ruining them for the future generations that will surely own them.

It's of the vintage that would have been driven by an overhead shaft via a leather belt to the flat pulleys on the spindle. The prime mover would have been a water wheel, steam engine, or large electric motor mounted elsewhere. Replacing the current 1/3HP motor will not effect any antique value, as it is not original, and will also make it more usable.

Al is right, the tailstock has a production lever on it, makes drilling holes a lot faster as you don't have to crank the handle in and out. This in itself is a pretty rare feature, and I encourage you to keep it intact.

It's a nice piece and the artistry of the castings alone tell you it was made in a different time. Good luck with it.

Brent at Robust

Re: Vintage Lathe Restoration

#8

Re: Might have b een a metal spinning lathe.

Paul Londo

>This lathe is a spinnimg lathe, I have one just like itand use it all the time. Mine came from the Mirro Aluminum Co. and was used for spinning kettles on. I got the headstock bed and legs for $10. My father-in-law was a machinist for that company (I was a truck driver)and made the tailstock , toolrest and faceplates and centers for it. It sure is a great chunk of old iron that I still use all the time.

Re: Vintage Lathe Restoration

#9

Re: Vintage Lathe Restoration *LINK*

Walter Ahlgrim

>You are more likely to find about your lathe at on the old woodworking machine forum post to the �shop�

owwm.COM is down at this time but owwm.ORG is up and running.

Walta


Old Wood Working Machine. ORG

Re: Vintage Lathe Restoration

#10

Dick Hines

Re: Vintage Lathe Restoration

Dick Hines

>Old lathes are like old V-twin motorcycle motors. If taken care of they will last for ever.

Re: Vintage Lathe Restoration

#11

Thanks

David Miller from Iowa

>to all for your insight. I have been on the slippery slope with hand tools for more than 20 years, but I think I can find time to think about power tools, if they are old enough.

David

Re: Vintage Lathe Restoration

#12

1/3 HP may be enough for this lathe

wilbur

>Regarding the 1/3 HP motor, the older motors seem to develop more torque than modern motors with equivalent HP ratings. I have a 1940's era Walker Turner lathe with a 12" swing and a 1/3 HP motor, and it has handled everything I've tried on it so far, including bowl blanks that are pushing the limits of my lathe's capacity. I think that by the time I need a bigger motor, I'll need a bigger lathe.

I would give it a try, and replace the motor only if you get to the point where you have a piece of wood that your lathe's motor can't handle.

Re: Vintage Lathe Restoration

#13

Re: Vintage Lathe Restoration

Bill Hale / The Wood Spinner

>David

On the leg sets, that I have seen, like yours there are two bolts on each end to mount the lathe. If this be the case you could put a nice finished wood timber between the lathe and legs as a riser. It could be finished natural or painted grey to match the lathe. I would also bolt it down as it will be top heavy.

Good turning and be safe

Bill in CG, AZ.