Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Marion Randolph

Posts

Marion Randolph

#1

Marion Randolph

john lucas

>I did a photo shoot of my friend Marion this weekend for a possible article for Woodturning. Marion makes big things. He's 82 and about 5/6" but turns bowls as big as 30". Here is a photo of him at the lathe. For the actual turning photos he stuck a piece of Mimosa on there. We all starting sneezing immediately. It was the only piece he had ready for the lathe so we kept it to minimum.

His homemade lathe was copied after Ed Moultroup's. It weights about 1000 lbs thanks to 7:50 lbs of lead that he got from the local shooting range. It has a 2hp motor and uses a riding lawnmower transmission to drive it. The shaft is 2 1/2" with 1 1/2" thread to match his old powermatic. He was turning a wasteblock on the powermatic for his next bowl. The wasteblock is bigger than many people's normal bowls.

I sure hope I'm that sharp and in that good a physical shape when I'm 82. He also has to haul this wood down to the basement. He sets the log on the top of the steps. Then piles a bunch of small limbs on the steps to absorb the fall. The he pushes the log down the steps. One day he was walking down to adjust the branches and the log just fell and followed him down. Broke his leg but being the trooper that he is he didn't go to the doctor until later that evening.


img

Re: Marion Randolph

#2

Steven Antonucci

Looks like most of the lathe is made out of wood?

steve antonucci

>All of the non mechanical parts at least.

Thanks for sharing and reminding us that "What lathe? is best answered by "the one you got".

Steven

Re: Marion Randolph

#3

Re: Looks like most of the lathe is made out of wo

john lucas

>Steve There are very few metal parts on the lathe. This all started because Marion got one of his latest pieces accepted into a really good show. He decided to send a photo of the piece to the Editor of Woodturning and Mark Baker asked him to submit some more photos of his work along with a shop shot.

Re: Marion Randolph

#4

Re: Marion Randolph

Steven Kubien

>Thanks for sharing this John. You must've had some fun talking and sharing 'war' stories. A question about his tool rest/banjo... Is it a free-standing arrangement or is it some how connected to the ret of the lathe? I like my Nova 1624 and see using it for many years but when space (and to a lesser degree, need) arise, I would love to build a dedicated bowl lathe.

Cheers eh!

Steve Kubien

Ajax, Ontario

Re: Marion Randolph

#5

Re: Marion Randolph

john lucas

>It is an 8x8 piece of white oak that goes clear through the lathe, somewhat similar to the way the tool rest works on the VB36. The first one I saw was on Ed Moulthroups machine that appeared in some magazine. The tool rest itself is bolted to this chunk of wood and is probably 2" around. The actual tool rest he made many years ago from a flat piece of steel. He cut it to shape using a circular saw with an abrasive wheel. He said he was young and stupid when he did it (about 68 years old If i remember correct)

Re: Marion Randolph

#6

Re: Marion Randolph

jake Niedling

>Well congratulations to Marion. I have visited his shop and this lathe is very substantial and made for large pieces. Marion is a great guy and very enjoyable to visit with and has a great sense of humor. He does some very nice turnings. John, thanks for sharing this with us.

Re: Marion Randolph

#7

I'm impressed!

wilbur

>I'm very impressed that:

1. There's a shop where a Powermatic lathe is the small one, and

B. The aforementioned Powermatic lathe is relegated to turning waste blocks.

Re: Marion Randolph

#8

Thank you

Steven Kubien

>Thanks John. I think this would be really cool project someday and if I go through with it, it will definately be simple arrangement like this (I cannot weld and have no real interest in learning). I can see making the base out of 6x6's in a flower-planter style and filling that with bags of sand and gravel and putting a wopping big motor on it. In fact, if I get rid of my workbench, knock a whole on the garage wall......

Cheers,

Steve Kubien