Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

new lathe

Posts

new lathe

#1

new lathe

jimtex

>hey ya'll!! my little shop was destroyed in the summer floods last year here in central texas, so i now have a new metal building and am setting up housekeeping. i have decided that turning is what i want to do, so need to get a larger lathe,(am using a delta midi right now). i can't justify spending a ton of money so would like to stay under three grand. any suggestions? thanks, jim.

Re: new lathe

#2

Re: new lathe

Ron McKinley

>I would recommend the DVR-XP. I've had mine almost two years now with absolutely no problems. It swings 16" but can be swiveled to turn bigger. It's 1 3/4 hp on 120vac and 2.3 hp on 240 vac. No belts and pullies to worry about since the motor is built around the drive shaft and it's variable speed from about 200 rpm to 3,000 rpm and it's reversible. Bed extensions are available to turn long spindles and it's always done everything I asked of it.......Ron

Re: new lathe

#3

JL

Re: new lathe

JL

>You can find a Powermatic 3520B for about $2800 at some places.

Re: new lathe

#4

Re: new lathe

jimtex

>thanks ron, thats funny cause i had just looked at this model on woodcraft's site. i was worried about vibration causing the electronics to fail. evidently that won't happen! thanks again, jim

Re: new lathe

#5

Re: new lathe

robo hippy

>The PM is the best bang for your buck in that price range. Heavier, and more hp. Variable speed is a dream. I have abused mine severely for 8 years. I am selling it to a friend once my Robust gets here (had to step up to heavier and more hp again). Que, proto simian grunt, like Tim the tool man Taylor.

robo hippy

Re: new lathe

#6

Re: new lathe

David Walser

>Jim,

I'd also opt for the Powermatic 3520B in that price range. Here's a link to one of the vendors. I think PM now has a rebate promotion.

PM 3520B

There are other lathes in that price range, but that one has a reputation for quality and value.

Re: new lathe

#7

Re: new lathe

Bill Neddow

>Buy the Powermatic. I assume you do not need it to be portable. If so, the Nova DVR is the way to go. I recently bought a DVR, which i am very happy with. I need to be able to take it to different locations for demonstrations. If it was never to be moved from my shop, I would have bought the Powermatic. It is a much stronger lathe, capable of bigger work.

Re: new lathe

#8

Re: new lathe

Ralph

>I own a DVR-XP, I bought it for the abilities and size.

If size wasn't an issue, in under $3K, I would go with the PM

If cost was less of an issue, I would go with the Vicmarc-300S

Ralph

Re: new lathe

#9

Re: new lathe

Barry Irby

>I have a Nova DVR and would buy it again in a minute.

You can't go wrong with the Powermatic either.

If I were buying the DVR again, I would check with the Nova service guy Tim Geist and see about buying a reconditioned one. Might save a chuck of change. He also may have chucks and other bits and pieces.

Re: new lathe

#10

Re: new lathe

don lewonczyk

>Try the toolnut and talk to David Murry, very pleasant to deal with and very helpful. I bought the Powermatic 3520B with extention for $2699 including shipping. Toll free number 1-877-866-5688 you can tell him he sold to me last week if you wish. He saved me a few hundred. I also have a Nova DVR which I really like and have the bed out to 60" between centers for walking sticks. It is a very capable lathe and rigged up for vacuum chucking and I have the Nova ornamental mill for it so I will never get rid of it and like I said it is a good lathe. Service for both lathes can't be beat either. Take care and happy hunting. DonL