Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Help with Club Video System

Posts

Help with Club Video System

#1

Help with Club Video System

RK in Milwaukee

>Our club needs a video setup for demos. I would appreciate any ideas as to equipment options. It looks like the cameras that Woodchuckers used to sell are no longer in production.

Ron Nelson

Re: Help with Club Video System

#2

Re: I have found a good source for .......

Jamie Donaldson

>..... mini video cameras and switchers to build a system very much like the old 3 camera system that is no longer available from Woodchuckers. The new Sony cameras are tiny, and this is the system we are using to upgrade the AAW Symposium demo equipment right now. I will post specifics later this evening when I return to my office where I have the info.

Re: Help with Club Video System

#3

Re: I have found a good source for .......

keith zimmerman, Normal IL

>Jamie, I am planning to attend your session at Richmond to find out about this subject for my club. Do you plan to have handouts with how to setup a system and recommendations on sources? That would be very valuable information.

Looking forward to seeing you in Richmond.

keithz

Re: Help with Club Video System

#4

Re: That's what the demo will be about!

Jamie Donaldson

>

Re: Help with Club Video System

#5

Re: Help with Club Video System

John K Jordan

>There are many places that sell tiny cameras. I bought some from a local electronic store in Knoxville, Shields Electronics. They have wide angle lenses that have a large depth of field and the picture is amazingly sharp and clear. These things are tiny and would be easy to mount above the lathe or close to the operator. They are sold as security cameras.

Some people try to use a small video camcorder thinking it can double for general recording, but in my mind this adds a lot of complexity and makes remote mounting and operating more difficult.

Another thing available is a remote (wired) pan/tilt head. I have one made by Sony with a long control/power cable. This might be great for tweaking an overhead camera during a demo.

You might look for a used video switcher. I have one that will accept four cameras, preview of all the cameras on the operator's monitor, and let you switch between them with a variety of transitions. This was about $1100 new but that was a long time ago and a new one of the same quality might be inexpensive, or maybe you could find a used one.

JKJ

Re: Help with Club Video System

#6

Re: Keith Z and others who might....

Jamie Donaldson

>...be interested in video set-up for demos, here are the sources and parts numbers I have found from www.123cctv.net

Sony mini cameras #2445c for $76 ea.

4 channel switcher #2704ns for $50 ea.

For camera stands from www.bhphotovideo.com

Impact LS-6B for $20 ea.

If anyone knows of other sources for similar equipment I would certainly appreciate you input.

Re: Help with Club Video System

#7

Re: Keith Z and others who might....

keith zimmerman, Normal IL

>Thanks for the info Jamie. This will help me research this topic for my club. I'm looking forward to your session in Richmond.

keith

Re: Help with Club Video System

#8

Re: Keith Z and others who might....

RK in Milwaukee------WebKitFormBoundaryZMH+2rVMUe9

>Thank you Jamie. Your info is terrific. Just what I was looking for!

Ron Nelson

Re: Help with Club Video System

#9

Re: Keith Z and others who might....

Greg in Oshkosh

>We are also looking for an audio system that can be hooked up with our video.

Right now we use the audio on the camcoarder which works well on the recording but can't be herd in the room during the demo

Any suggestions??

Re: Help with Club Video System

#10

Re: It's usually hard to beat the price..

Jamie Donaldson

>....and availability of Radio Shack equipment, and I selected A RS 10" PA speaker #40-0210 for $50 and a RS 40w ampilifier/equalizer #32-2054 for $80 and they work well. The amp takes the input from a RS wireless mike for which I don't have an exact number available, but the whole system is satisfactory for the price and use intended.

Re: Help with Club Video System

#11

Re: Help with Club Video System

John Abt

>I'm currently putting together a demo system for our club, and I haven't finalized my design, yet, but I may wind up using digital cameras that have a movie mode for video or possibly clearances on a couple of miniDV cameras. The quality of the miniDV is great. I borrowed my daughter's camera for a demo and was really surprised.

I'm also open to any and all suggestions and recommendations. I'd like to join you in Richmond.

Thanks!

John