Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

First Platter

Posts

First Platter

#1

First Platter

Chris DiCiaccio

>Finally tried to turn a platter. It's a scrap piece of Cherry 1"x 9". You have to start somewhere, right?


img

Re: First Platter

#2

Re: First Platter 

Chris DiCiaccio

>


img

Re: First Platter

#3

Re: First Platter

Mark Mandell - Gone Round In Jersey

>Good Start, Chris.

Next time, make the shape of the back match that of the front; looks like two different pieces.

Keep it up |;-}

Re: First Platter

#4

Re: First Platter

Cyril Griesbach

>Well done and I agree with Mark. If that's scrap Cherry you can send me some.

Re: First Platter

#5

Re: First Platter

Bill Hale / The Wood Spinner

>For a first piece it is great. I agree about the inside and outside shape being the same. Looking at the back I could not tell if it is finish or sanding but it could be a little better. It kind of looks as a buff out would take care of it. No buffer, just use 0000 steel wool.

Again you did good!

Good turning and be safe

Bill in CG, AZ.