Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

3/4" x 10 thread, need help

Posts

3/4" x 10 thread, need help

#1

3/4" x 10 thread, need help

jeff

>Hi all

I need to locate chucks, adapters, etc. for a lathe spindle threaded to 3/4" x 10 tpi.

A little odd size to me.

Any ideas where to look?

Jeff

Re: 3/4" x 10 thread, need help

#2

Re: 3/4" x 10 thread, need help

Gary in Zirconia,NC

>There are adaptors to fit chucks with various threads to the Oneway live center. Those should work.

Re: 3/4" x 10 thread, need help

#3

Re: 3/4" x 10 thread, need help

john lucas

>Are you positive it's 3/4x10. There were several small lathes that had 3/4x16 spindles. Grizzly shows a 3/4X10 insert but it only fits the e and 4 jaw metal lathe chucks and an 8" faceplate.

Re: 3/4" x 10 thread, need help

#4

Bill Blasic

Re: 3/4" x 10 thread, need help

Bill Blasic

>Nova chucks can get insert H - 3/4" 10TPI BSW RH. You could then use a nova chuck G3 or SN2.

Re: 3/4" x 10 thread, need help

#5

Yes, my 3/4 x 16 doesn't fit.

jeff

>